icon Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 100 + Commutator Cm-F | CaldaieMurali

Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 100 + Commutator Cm-F

Description

COMPLETE WITH CM-F ON/OFF CABINET SWITCH

FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 100 + free CM-F switch


  • Max-min cooling capacity: 6100-4400 W
  • Max-min heat output: 14900-9600W
  • Dehumidification: 2100g/h
  • Max-min air flow: 1200-670 m3/h
  • No. of fans: 2
  • Max-min sound power: 61-49 db(A)
  • Max-min sound pressure: 52-40 db(A)
  • 3R main battery connections: 3/4"
  • 1R extra battery connections: 1/2 "
  • Water content batt.3R: 2.42 l
  • Water content batt.1R: 0.64 l
  • Power supply: 230-1-50 [VF-Hz]
  • Dimensions (HxWxD): 554+100 x 1440 x 220 mm; 34kg

Notes :

  • Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow as in maximum speed.

  • Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum
    fan speed; for medium and minimum fan speed, water flow rate as in maximum speed.


TOP FAN PLUS

Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room.
Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season.

Series with centrifugal fan, available in 9 sizes and three versions:

  • VM-B with casing for vertical and horizontal installation and suction from below
  • VM-F with casing for vertical and horizontal installation and front suction
  • VN without casing for vertical and horizontal installation

Characteristics:

  • Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel
  • Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops
  • Air filter easy to remove and clean, regenerable by washing or blowing
  • Fan unit with three-speed motor and aluminum impellers
  • Wide range of controls both to be installed on the machine and remote on the wall
SWITCH:

  • It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed.
  • Available in two different versions:
  • - for installation on CM-F cabinet
  • - for CMR-F remote installation

Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat.

NEW (OPTIONAL)

REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions:

  • Switching on\Switching off
  • Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-)
  • Fan speed (Max/Med/Min/Auto)
  • Set point temperature
  • Timer setting
  • °C or °F temperature scale setting

VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company.

WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer.


Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 100 + Commutator Cm-F

Product form

COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 100 + free CM-F... Read more

€317,00€249,00 Incl. VAT

    Description

    COMPLETE WITH CM-F ON/OFF CABINET SWITCH

    FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 100 + free CM-F switch


    • Max-min cooling capacity: 6100-4400 W
    • Max-min heat output: 14900-9600W
    • Dehumidification: 2100g/h
    • Max-min air flow: 1200-670 m3/h
    • No. of fans: 2
    • Max-min sound power: 61-49 db(A)
    • Max-min sound pressure: 52-40 db(A)
    • 3R main battery connections: 3/4"
    • 1R extra battery connections: 1/2 "
    • Water content batt.3R: 2.42 l
    • Water content batt.1R: 0.64 l
    • Power supply: 230-1-50 [VF-Hz]
    • Dimensions (HxWxD): 554+100 x 1440 x 220 mm; 34kg

    Notes :

    • Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow as in maximum speed.

    • Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum
      fan speed; for medium and minimum fan speed, water flow rate as in maximum speed.


    TOP FAN PLUS

    Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room.
    Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season.

    Series with centrifugal fan, available in 9 sizes and three versions:

    • VM-B with casing for vertical and horizontal installation and suction from below
    • VM-F with casing for vertical and horizontal installation and front suction
    • VN without casing for vertical and horizontal installation

    Characteristics:

    • Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel
    • Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops
    • Air filter easy to remove and clean, regenerable by washing or blowing
    • Fan unit with three-speed motor and aluminum impellers
    • Wide range of controls both to be installed on the machine and remote on the wall
    SWITCH:

    • It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed.
    • Available in two different versions:
    • - for installation on CM-F cabinet
    • - for CMR-F remote installation

    Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat.

    NEW (OPTIONAL)

    REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions:

    • Switching on\Switching off
    • Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-)
    • Fan speed (Max/Med/Min/Auto)
    • Set point temperature
    • Timer setting
    • °C or °F temperature scale setting

    VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company.

    WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer.


    Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 49.0 kg
    • marca: Ferroli
    • modello: Ventil_VM-B100
    • potenza in kw: 10
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account