Discover our exclusive collection of Ferroli boilers, air conditioners and water heaters. Choose comfort and efficiency with our quality products. Reach maximum domestic comfort with Ferroli. Explore our collection today.
Ferroli
Ferroli Occasions Area - Ferroli Divatech D Ln C 24 Low Nox Open Chamber Methane Boiler - New Erp
ATTENTION The product is new and 100% functional, but has dents on the front side and the display frame has scratches (see photos) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available Ferroli DIVATECH D LN C 24 Low NOx Open Chamber Natural Gas Boiler - NEW ErP Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Performance Heating nominal heat output (Pn) Min / Max kW 7.0 / 23.5 Min / Max heat input kW 8.3 / 25.8 DHW useful thermal power kW 23.5 Efficiency (Pn) % 91.0 Maximum sanitary production Δt 30°C Δt 25°C l/min l/min 11.2 13.4 NOx class 6 DIVATECH D LN (LOW NOx) WALL-MOUNTED BOILERS WITH INSTANT DOMESTIC PRODUCTION WITH DOUBLE EXCHANGER. OPEN CHAMBER - NATURAL DRAFT - LOW NOx > STRONG POINTS: - Compact geometry primary heat exchanger entirely in copper - Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger - Standard by-pass - Open chamber and natural draft boiler, with low NOx emission atmospheric burner, in AISI 304 stainless steel - High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity - Can be combined with the modulating remote timer control - Casing painted white by anaphoresis with epoxy powders - Simple and complete control panel, display user interface, with setting keys - Compact dimensions and low weight > ADVANTAGES OF DIVATECH D LN: - Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card - ECO/COMFORT system for rapid production of domestic hot water - Adjustable post-circulation after the heating phase - Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€473,00
-
Ferroli Ferroli Divacondens D Plus F24 Low Nox Methane Condensing Boiler Complete With Smoke Exhaust Kit
ATTENTION ! The boiler will be supplied with methane, for LPG operation you must contact your local Authorized Assistance Centre. Technical features Model : Divacondens D Plus Nominal thermal power: 24 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: B Seasonal Space Heating Energy Efficiency : 89% Performance Heating Thermal Capacity : 7,5 ~ 25,0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Ultimate Thermal Efficiency 30% Pmin : 100.1% Domestic Hot Water Production 25°C Δt 30°C : 13,9 ~ 11,6 l/min NOx emissions 6 Dimensions and weight Dimensions (LxHxP): 400x700x330 mm Weight : 35Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package sets ambitious targets for the reduction of greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€580,00
-
Ferroli Ferroli Divacondens D Plus F24 Low Nox Methane Condensing Boiler Complete With Smoke Exhaust Kit
FERROLI DIVACONDENS D F24 METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT-NEW ERP Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 25.8 Nominal thermal power Pn kW 24 Efficiency Pmax (80/60°C) % 96.5 Yield 30% % 103.5 Directive efficiency class 92/42 EEC **** Max heating / sanitary operating pressure. bars 3 / 9 Max heating temperature 90 °C Heating water content liters 1.5 Heating expansion tank capacity 8 litres Exp. vessel preload pressure heating bar 1 Sanitary water content 0.3 litres Sanitary flow rate ∆t 25°C l/min 14.0 Sanitary flow rate ∆t 30°C l/min 11.6 IP X5D degree of protection Electric power absorbed W 95 Extremely compact dimensions (LxHxP): mm 400x700x330; 35kg Sound power level LWA dB 57 NOx class 3 Power supply: METHANE DIVA CONDENS D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. The quality of the DIVACONDENS line is unquestionable, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage with the "5 years worry-free" formula which also ensures periodic maintenance and legal checks. Range Divacondens D is available in two models for heating and instantaneous production of domestic hot water forced draft boiler and sealed chamber mod. F 24 - MAXIMUM THERMAL CAPACITY 25.0 kW mod. F 28 - MAXIMUM THERMAL CAPACITY 28.0 kW Strengths: Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels Compact geometry primary heat exchanger entirely in copper Instant production of domestic hot water with dedicated plate exchanger Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit Forced draught sealed chamber boiler, with AISI 304 stainless steel atmospheric burner Standard hydraulic by-pass High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity Can be combined with the modulating remote timer control Simple and complete control panel, display user interface, with setting keys Advantages of Divacondens D: Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. Functions: ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The DIVACONDENS D electronic board adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite CONTROL UNIT The DIVACONDENS D control unit consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. COMBINABLE WITH THE ROMEO CHRONO CONTROL: The Romeo chrono control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€575,00 - €580,00
-
Ferroli Caldaia Ferroli a condensazione Bluehelix Theta 24C completa di kit scarico fumi Metano o Gpl 0TPY2AWA
ATTENZIONE Trasformazione metano/GPL/Aria propanata gratuita in sede di verifica iniziale del prodottoed attivazione della garanzia convenzionale, da richiedere al Centro Assistenza Autorizzato Caldaia Ferroli a condensazione Bluehelix Theta 24C completa di kit scarico fumi Metano o Gpl 0TPY2AWA Specifiche etichetta energetica secondo direttiva Europea ErP classe ERP(Classe G - A++) A / (Classe G - A) A Portata termica max / min riscaldamento kW 20,6 / 5, Potenza termica max / min riscaldamento (80/60°C) kW 20,0 / 4,9 Potenza termica max / min riscaldamento (50/30°C) kW 21,8 / 5,3 Portata termica max / min sanitario (Hi) kW 25,0 / 5,0 Potenza termica max / min sanitario kW 24,3 / 4,9 Rendimento Pmax / Pmin (80-60°C) (Hi) % 97,2 / 97,0 Rendimento Pmax / Pmin (50-30°C) (Hi) % 105,8 / 106,9 Rendimento 30% (Hi) % 108,8 Pressione max / min esercizio riscaldamento bar 3 / 0,8 Pressione max / min di esercizio sanitario bar 9 / 0,3 Portata sanitaria ∆t 25°C l/min 14 Portata sanitaria ∆t 30°C l/min 11,7 Dimensioni LxAxP mm 420x700x250 ; Peso a vuoto kg 27 Bluehelix Theta CALDAIA MURALE A CONDENSAZIONE PRODUZIONE SANITARIA ISTANTANEA > PUNTI DI FORZA: Caldaia con scambiatore primario in acciaio inox mono circuito privo di giunzioni e/osaldature, mantiene un’alta efficienza anche su vecchi impianti. MC2 : Multi Combustion Control, nuovo sistema di combustione con tecnologia brevettata gas-adaptive di derivazione industriale per una migliore adattabilità di utilizzo al variare delle condizioni della rete gas (es. fluttuazioni o ridotte pressioni) M.G.R: Metano, Gpl, Aria propanata Ready mediante una semplice configurazione la caldaia è in grado di funzionare a metano, gpl ed aria propanata senza l’utilizzo di kit di conversione aggiuntivi Produzione istantanea di acqua calda sanitaria con scambiatore sanitario a piastre dedicato Interfaccia utente con display e tasti multifunzione per la regolazione e l’impostazione dei parametri By-pass di serie Attacchi idraulici coperti dal mantello caldaia Mantellatura smontabile in 3 parti per una facile e veloce manutenzione Design raffinato e dimensioni compatte > VANTAGGI DI THETA C: Predisposizione impianti solari: predisposta per la produzione di acqua calda sanitariaùcombinata con impianti a pannelli solari Funzionamento a temperatura scorrevole tramite sonda esterna opzionale Circolatore riscaldamento modulante a basso consumo (ErP Ready - Classe A) Controllo fiamma digitale con tre tentativi di riaccensione in caso di blocco di funzionamento per mancanza rilevazione di fiamma (mod. a metano) F.P.S: Sistema di Protezione Fumi. Con l’utilizzo dell’accessorio fumi opzionale (041106X0 - kit valvola clapet gas scarico) installabile all’esterno della caldaia, è possibile una facile connessione a sistemi collettivi fumari in pressione (ad es. nei risanamenti), in accordo alla normativa UNI 7129. NB: il kit non è utilizzabile nelle installazioni ad incasso Luogo di installazione: anche per esterno in luogo parzialmente protetto fino a -5°C di serie e fino a -15°C con l’ausilio del kit resistenze antigelo opzionale Trasformazione metano/GPL/Aria propanata gratuita in sede di verifica iniziale del prodotto ed attivazione della garanzia convenzionale, da richiedere al Centro Assistenza Autorizzato Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto
€609,00
-
Ferroli Open Chamber Boiler Ferroli Divatech D Ln C 24 Low Nox LPG - New Erp
The boiler is supplied with methane. Transformation of methane/LPG/Propaned air to be requested in advance from the Authorized Assistance Centre Technical features Model : Divatech D LNC 24 Power supply: LPG Energy efficiency Heating energy efficiency class: C Sanitary energy efficiency class: A ACS profile : XL Performance Heating nominal heat output : 7.3 ~ 22.8 kW Heat output : 8.3 ~ 25.0 kW Domestic useful thermal power: 22.8 kW Efficiency : 91.2% Maximum production of domestic hot water Δt 25°C : 13.8 l/min Maximum production of domestic hot water Δt 30°C : 10.9 l/min NOx : 6 Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli boiler DIVATECH D LN LOW NOX Wall mounted boiler with instantaneous domestic hot water production with double exchanger , open chamber, natural draft Strengths - Compact geometry primary heat exchanger entirely in copper - Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger - Standard by-pass - Open chamber and natural draft boiler, with low NOx emission atmospheric burner , in AISI 304 stainless steel - High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity - Can be combined with the modulating remote timer control - Casing painted white by anaphoresis with epoxy powders - Simple and complete control panel, display user interface, with setting keys - Compact dimensions and low weight Advantages of Divatech D LN - Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card - ECO/COMFORT system for rapid production of domestic hot water - Adjustable post-circulation after the heating phase - Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air by means of a specific transformation to be requested from the Authorized Assistance Centre - Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€473,00
-
Ferroli Ferroli Sky Eco 11f Low Nox Gas Water Heater Complete With LPG Fume Kit - New
Ferroli SKY ECO 11F Low NOx gas water heater complete with LPG fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 21.7 Thermal power Max / Min kW 19.5 / 5.5 Maximum working pressure 10 bar Maximum DHW production Δt 25°C / Δt 30°C l/min 11.2 / 9.3 Power supply V/Hz 230 / 50; 14 Kgs New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation - Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Solar installations Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€365,00
-
Ferroli Ferroli Condensing Boiler Bluehelix Alpha 24c Complete With Methane Or LPG Fume Exhaust Kit Cod. 0tpf2awa
ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Ferroli condensing boiler Bluehelix Alpha 24C complete with methane or LPG fume exhaust kit cod. 0TPF2AWA Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max / min heat input (Hs) kW 22.9 / 4.7 Max DHW heat input (Hi) kW 25 Max working pressure heating bar 3 Min. heating operating pressure bar 0.8 Heating expansion vessel capacity 8 litres Max DHW working pressure bar 9 Minimum DHW operating pressure bar 0.3 Sanitary flow rate ∆t 25°C l/min 14 Protection degree (IEC 60529) IP IPX4D Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x250 Bluehelix Alpha .. More beautiful than "BEFORE" The new range of generators is equipped with the tested heat exchanger in stainless steel . Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX ALPHA is at the top of its category. TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) mod. 24 C COMBINED (14 l/min at ∆t 25°C) The BLUEHELIX ALPHA thermal group exchanger (fig. A) compared with the more classic and widespread steel exchanger. This geometry allows the exchanger to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig. B tends to block up much faster in the part in contact with the flame due to the reduced passage area of the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values BLUEHELIX ALPHA FROM THE INSIDE EXCHANGER High flow single circuit stainless steel exchanger, resistant to clogging and easy to clean STEEL FRAME Made with high precision automated processes EXPANSION TANK 8 liter expansion tank placed on the side ELECTRIC PANEL FAN Offset fan, to facilitate maintenance of the primary exchanger without disassembly DOMESTIC HOT WATER EXCHANGER In stainless steel, with copper brazing CIRCULATOR High efficiency, for heating and exchange with the DHW circuit SEALED CHAMBER Removable steel panel to protect the combustion chamber with the function of a sealed chamber ELECTRICAL PANEL Large removable electrical panel to protect against any water damage that may occur during normal maintenance. Easy access to electrical connectors. THE ENGINE The tube that makes up the BLUEHELIX ALPHA exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. THE BOILER CONTROL The control box of BLUEHELIX ALPHA consists of an easy to use interface with backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MC2 The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). MGR Methane, LPG, Propane Ready Air The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Thanks to the new electronics supplied, the gas change operation is extremely simple. The MC2 combustion control performs constant monitoring of the quality of the combustion and by simply modifying a parameter on the electronic card (operation to be carried out only by qualified personnel) it is possible to operate the boiler on Natural Gas or LPG or Propane Air. It is therefore not necessary to purchase additional accessory kits. CONNECT New wireless remote control available as an accessory for home comfort management also from a smartphone using the connect app (iOS and Android). Maximizes room comfort with delivery temperature modulation through the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions via the external temperature detectable directly from the internet (or from an optional external probe). It improves the average seasonal efficiency in space heating by +4%. EASY MAINTENANCE Problem-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the BLUEHELIX ALPHA thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - Easy access to the burner unit by removing 4 screws and the quick coupling (clip) of the fan. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front SUN EASY FUNCTION BLUEHELIX ALPHA has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. By means of a sensor located on the DHW circuit, it continuously controls the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. STOP AND GO FUNCTION With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these "false starts" can, in the long run, compromise the average life of the product. For this reason BLUEHELIX ALPHA provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water. OUTDOOR INSTALLATION - ANTIFREEZE FUNCTION To make the most of the available space, the new BLUEHELIX ALPHA 24 - 28 C boiler can be installed recessed into the wall thanks to the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. SANITARY ECO-COMFORT FUNCTION In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. The efficiency and the load profiles according to the ErP directive are at the top of the category: mod. 24 C / A - XL. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€653,00
-
FERROLI Ferroli Giada S 12000 Btu Inverter Air Conditioner Integrated Wi-Fi Alexa And Google Home - New
Ferroli Giada S 12000 btu Inverter Air Conditioner Integrated Wi-Fi Alexa and Google HOME - NEW Cooling SEER 6.1 ErP class A++ Nominal cooling capacity (1) W 3,350 Heating Climatic zone Medium SCOP 4.00 ErP class A+ Thermal power (2) nominal W 3.570 Indoor unit features Air flow (max-med-min) m3/h 540 / 430 / 314 Sound pressure (3) (max-med-min) dB(A) 40.5 / 34.5 / 25 Sound power (max) dB(A) 55 Outdoor unit features Air flow m3/h 1,800 Sound pressure (3) dB(A) 56 Sound power dB(A) 63 Refrigerant gas Type / GWP R32 / 675 Liquid / gas line connections inch 1/4" - 3/8" Maximum height difference 10 m Dimensions WxHxD mm Indoor Unit 805x285x194 External Unit 720x495x270 JADE Are you looking for a quality air conditioner at the right price ? Evaluate Giada, the brand new split heat pump system by Ferroli, in the Mono and Multi versions, able to satisfy all needs. Giada simply has it all. Thanks to the optimized refrigerant circuit and the regulation that modulates the compressor with DC Inverter technology, these machines are able to precisely and punctually follow your temperature setpoints, both in hot and cold. This translates into reduced noise, maximum comfort and top efficiency, saving you kilowatt-hours of electricity on your bill. The mono-split versions of Giada, for example, never go below class A++. Furthermore, they use R32 refrigerant, an ecologically more sustainable gas: it does not affect the ozone layer and has a GWP of about a third compared to the more classic R410A. All Giadas can then connect to your Wi-Fi, as standard, without expensive accessories. In addition, the new Giada air conditioners are compatible with the "Amazon Alexa" and "Google Home" voice assistants. Thanks to our free App, you can manage and program them simply and remotely. But that's not all, a double stage of filtration and an advanced treatment of the external battery are also included to protect it for a long time from atmospheric agents. All the advantages of GIADA Ferroli's DC Inverter technology can also be used in Boost mode to reach the required temperatures in the shortest time possible. This can reduce the efficiency of the machine for short periods, but it is very useful if we need to quickly dilute or refresh a local. The internal exchanger is then specially designed with a 54-tooth geometry, larger than the traditional ones (which have 45 teeth), offering a greater exchange surface. The external exchanger instead includes a special treatment called Golden Fin, which guarantees a better protection (compared to more common treatments, such as Blue Fin) from external agents, whether chemical or atmospheric. With regard to air quality, Giada air conditioners, both in the Mono and Multi Split versions, have a quadruple level of filtration, made up of "Cold Catalyst", "Active Carbon", "Silver Ion" and "Biohepa" filters. In addition, Giada is equipped with the new “Super Ionizer” sanitizing technology. 4 Filters: Cold Catalyst, Active Carbon, Silver Ion and Biohepa New four-layer filtering technology that allows you to purify the air from gases, odours, formaldehydes, pollens, pollutants, bacteria, viruses and fungi present in the air. New Super Ionizer New Ionizer that releases millions of ions which drastically reduce the presence of viruses and bacteria in the air In addition to convenience, WiFi connectivity and voice command compatibility are included With an unbeatable price, Giada air conditioners guarantee SEER and SCOP capable of achieving efficiency classes A++ in cold and A+ in heat (for the typical medium temperature range). Furthermore, all the machines are equipped as standard with a Wi-Fi connection, thanks to which it is possible to connect remotely with the Ferroli App. In addition, the new range now becomes compatible with the "Amazon Alexa" and "Google Home" voice assistants for home automation. Naturally the supplied remote control (to which we have enlarged the display listening to you, our customers) is able to manage all the functions of Giada. Furthermore, the App offers you the possibility of remote access, together with the very useful Smart Diagnosis function, thanks to which you can carry out as many as 97 functional tests on your air conditioner, to check its state of good health and identify a possible (how unlikely) problem.
€319,00
-
Ferroli Ferroli Titano Twin Double Tank Electric Water Heater 80 Liters Integrated Wi-Fi - New
Ferroli Titano Twin Double Tank Electric Water Heater 80 liters Integrated Wi-Fi - NEW Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Annual electricity consumption (AEC) kWh 1316 Daily electricity consumption (Q elec) kWh 7753 Sound power level dB 15 Recovery times at 40°C (cold water 15°C) l 85' Capacity l 80 Electric power W 1800 Settable temperature range °C 40 - 80 Standard temperature set °C 70 Max working pressure bar 8 Power supply V/Hz 230 / 50 Dimensions WxHxD mm 542x314x1077 TWIN TITAN Maximum comfort and respect for the environment The advanced technology of TITANO TWIN will make bathing or showering a very pleasant experience. Through 4 cuts of different power, TITANO TWIN offers maximum comfort while ensuring the lowest possible consumption. Let's see the various strengths. NEW SMART FEATURE Using the Smart function, the water heater automatically manages electricity consumption according to the user's habits, adjusting production to the actual demand for hot water. EASE Extremely simple to install and with compact dimensions, they have been designed and built to access the internal components easily, so as to always guarantee very easy maintenance. GREEN SOUL The composition of the CFC and HFC-free polyurethane insulation contributes to the conservation of the environment by not emitting pollutants into the atmosphere. LONG LIFE ELIXIR “Blue Forever ” anti-limescale protection of the anode Maximum protection against limescale The special Blue anti-limescale coating Forever guarantees an excellent anti-limescale property and prevents it from depositing Optimal operation for the entire life cycle The anti-limescale treatment on the internal components guarantees an extension of the life of the water heater Direct transmission of heat to the water The absence of limescale allows direct contact with the water, guaranteeing perfect heat transfer and the consequent increase in efficiency and comfort. Maximum duration The fact that the resistance, free of limescale, does not overheat guarantees the maximum duration of the component Anode separated from the resistance The anode separated from the resistance is protected from limescale deposits prolonging its best functionality over time. Product plus > Extremely compact dimensions and possibility of vertical or horizontal installations > Elegant and linear design for insertion in any type of domestic environment > Double tank for greater efficiency > SMART type electronic control for electricity savings of up to 20%. > Comes standard with Wi-Fi control > Easy to read digital control panel and simple and intuitive controls > The inside of the kettles and the electric resistance are treated with the Blue Forever system for greater durability over time > Double magnesium anode (one per tank) > Safety valve (8 bar) supplied as standard MULTI-POSITION All models, from 30 liters to 100 litres, can be installed both vertically and horizontally without modifying the appliance. The internal layout of the components has been designed so that, regardless of the direction of installation of the appliance, there is no loss of performance and effectiveness. NB: Horizontal installation only with connections on the left. ANTI-LEGIONELLA In a completely autonomous way, the electronics of TITANO TWIN carry out an anti-legionella cycle in order to sanitize the water and guarantee the health of the end user. APP The TITANO TWIN water heaters are standard equipped with a WiFi module integrated in the product in order to be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free you can fully manage TITANO TWIN at any time. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€250,00
-
Ferroli Open Chamber Boiler Ferroli Divatech D Ln C 30 Low Nox Methane Or Lpg - New Erp
The boiler is supplied with methane. Transformation of methane/LPG/Propaned air to be requested in advance from the Authorized Assistance Centre Technical features Model : Divatech D LNC 30 Product code : 0DCC6YWA Power supply: methane / LPG Energy efficiency Heating energy efficiency class: C Sanitary energy efficiency class: A ACS profile : XL Performance Heating nominal heat output : 11.1 ~ 30.0 kW Heat output : 12.6 ~ 33.0 kW Domestic useful thermal power: 30.0 kW Efficiency : 91.0 % Maximum production of domestic hot water Δt 25°C : 17.2 l/min Maximum production of domestic hot water Δt 30°C : 14.3 l/min NOx : 6 Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 30.0 Kg Ferroli boiler DIVATECH D LN LOW NOX Wall mounted boiler with instantaneous domestic hot water production with double exchanger , open chamber, natural draft Strengths - Compact geometry primary heat exchanger entirely in copper - Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger - Standard by-pass - Open chamber and natural draft boiler, with low NOx emission atmospheric burner , in AISI 304 stainless steel - High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity - Can be combined with the modulating remote timer control - Casing painted white by anaphoresis with epoxy powders - Simple and complete control panel, display user interface, with setting keys - Compact dimensions and low weight Advantages of Divatech D LN - Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card - ECO/COMFORT system for rapid production of domestic hot water - Adjustable post-circulation after the heating phase - Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air by means of a specific transformation to be requested from the Authorized Assistance Centre - Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€570,00
-
Ferroli Offer Fan Coil Fan Coil Ferroli Top Fan Plus Mod Vm-B 50 + Commutator Cm-F Free
Technical features Model : VM-B 50 Number of fans : 2 CM-F switch included Performance Power supply (V,Hz, Ø) : 220~240/50/1 Cooling power : 2390 ~ 3400W Heating power : 4930 ~ 7800W Dehumidification: 1150g/h Air flow : 350 ~ 615 m3/h Sound power : 36 ~ 51 db(A) Sound pressure : 27 ~ 42 db(A) Installation data Main battery connections: 3/4" Additional battery connections: 1/2 " Main battery water content: 1.88 litres Additional battery water content: 0.50 litres Dimensions and weight Dimensions (HxWxD): 554+100x1190x 220mm Weight : 27.0kg Ferroli TOP FAN PLUS fan coil Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall New version with infrared remote control Switch It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. Novelty Remote control Optional Infrared remote control, for all sizes and versions, with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Power on Power off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting Visible receiver Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF button and reception area. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. Recessed wall receiver The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with a yellow Timer led, a green operating led and an emergency ON/OFF and reception area button. It is supplied with a multipolar cable of a maximum length of 0.8 metres, for quick connection and with the electronic card to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€215,00€182,00
-
Ferroli Electric water heater Ferroli Calypso 50 Ho Horizontal 50 Liters
Technical features Model: Calypso 50 HO Horizontal Tank capacity: 48.5 litres Electric Power: 1200W Load profile : M ERP class : D Heating time (20+55°C) : 2h - 3 min Dimensions : 56.5 x 44 x 46cm Empty weight: 19 kg Warranty: 2 years CALYPSO MEDI LITRAGGI ELECTRIC WALL-MOUNTED WATER HEATERS For indoors The CALYPSO electric water heater is made of high quality steel, with a special powder enamel treatment inside the cylinder, created with advanced electrostatic application techniques and subsequent kiln firing at 850°C for perfect glass porcelain coating of the tank. To keep heat loss to a minimum, CALYPSO has been insulated internally with high density polyurethane foam without CFC content, externally with a polymer coating with high resistance to heat loss. All models are 100% tested to ensure perfect operation at the intended operating pressure. CALYPSO water heaters can boast three safety devices: a hydraulic valve which is activated in the event of overpressure in the internal tank and two automatic overtemperature protection systems. Characteristics: Models with capacities from 50 to 150 litres. Also available in mixed thermo (MT) version. Removable electric resistance in copper Probe thermostatic control. Magnesium anode to protect the tank. 5-bolt flange to ensure sturdiness and ease of periodic maintenance. Temperature level indicator. On/off light. Safety valve calibrated at 8 bar with drain cock and safety screw Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€141,00
You have seen 12 out of 457 products