IMMERGAS VICTRIX ZEUS SUPERIOR 32 KW METHANE CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 32.0 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 19.2; Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 29.0 (2.95); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27520) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 15.8; Specific flow rate x 10 min. (∆t 30°C) litres/min 19.2; Boiler losses kW 0.168; Nominal expansion vessel capacity liters 2.5 (1.2) Power supply: LPG. Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54 liter boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.
€2.752,00
IMMERGAS VICTRIX ZEUS SUPERIOR 32 KW LPG CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 32.0 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 19.2; Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 29.0 (2.95); Healthcare services: Useful thermal power for hot water production (kcal/h) 32.0 (27520) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 15.8; Specific flow rate x 10 min. (∆t 30°C) litres/min 19.2; Boiler losses kW 0.168; Nominal expansion vessel capacity liters 2.5 (1.2) Power supply: LPG. Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54-litre boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.
€2.752,00
FERROLI BLUEHELIX PRO 32C LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT -ErP Technical features Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Thermal input (PCI) Max Heating: 29,5 kW Thermal capacity (PCI) Max Sanitary: 32 kW Thermal power 80°C-60°C Max Heating: 28.9 kW Thermal power 80°C-60°C Max Sanitary: 32 kW Useful thermal efficiency 80°C-60°C: 98% Useful thermal efficiency 50°C-30°C: 106% Domestic hot water production Δt 30°C: 15.3 l/min Domestic hot water production Δt 25°C: 18.3 l/min Energy certification (92/42 EEC): **** Degree of protection: IP X5D Extremely compact dimensions (hxlxp): 600 x 400 x 320 mm; 31kg Power supply: CNG or LPG BLUEHELIX PRO Wall-mounted condensing boilers, premixed sealed chamber with instantaneous sanitary production New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production. Designed to guarantee maximum energy efficiency in heating and in the supply of domestic hot water, thanks to the new patented bivalent exchanger in AISI 316 TI stainless steel. This new exchanger integrates the heating circuit and the production of domestic hot water in a single element, pushing the phenomenon of condensation to the maximum. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. The range: Bluehelix Pro is available in 2 models, both running on methane and LPG. Both the 25C model and the larger size, 32C, offer large volumes of domestic hot water, quickly, which can be further reduced by activating the "Comfort" function Strengths: Primary heat exchanger in thick AISI 316 TI stainless steel with integrated DHW production (dual stainless steel heat exchanger). Patented High yields both in heating and in sanitary production Total premix burner in stainless steel Digital control panel Electronic flame modulation both in heating and DHW Can be combined with the modulating remote timer control Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Refined design and compact size Casing painted white by anaphoresis with epoxy powders Advantages : Exchanger with "SELF-CLEANING" function which reduces limescale deposits inside the DHW circuit High yields both in heating and in sanitary production Ease of access to internal components for any maintenance ECO function in DHW for greater savings in the period of low use of hot water Maximum comfort certified 3-star in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe High efficiency modulating heating pump (Erp Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Protection index IPX5D, equivalent to excellent electrical protection of the boiler from liquids and foreign bodies Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center Appliance belonging to class 5, the most ecological required by European standards (UNI EN 297 NOX and 483) Products that fall under the tax breaks provided for by the Finance Law in force Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: By installing the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. "SELF-CLEANING" function: Thanks to the "spiral" shape, the passage of domestic water inside the exchanger produces a "centrifugal" self-cleaning effect on the internal walls which tends to remove any limescale deposits. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€724,00
FERROLI BLUEHELIX PRO 32C METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT -ErP Technical features Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Thermal input (PCI) Max Heating: 29,5 kW Thermal capacity (PCI) Max Sanitary: 32 kW Thermal power 80°C-60°C Max Heating: 28.9 kW Thermal power 80°C-60°C Max Sanitary: 32 kW Useful thermal efficiency 80°C-60°C: 98% Useful thermal efficiency 50°C-30°C: 106% Domestic hot water production Δt 30°C: 15.3 l/min Domestic hot water production Δt 25°C: 18.3 l/min Energy certification (92/42 EEC): **** Degree of protection: IP X5D Extremely compact dimensions (hxlxp): 600 x 400 x 320 mm; 31kg Power supply: CNG or LPG BLUEHELIX PRO Wall-mounted condensing boilers, premixed sealed chamber with instantaneous sanitary production New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production. Designed to guarantee maximum energy efficiency in heating and in the supply of domestic hot water, thanks to the new patented bivalent exchanger in AISI 316 TI stainless steel. This new exchanger integrates the heating circuit and the production of domestic hot water in a single element, pushing the phenomenon of condensation to the maximum. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. The range: Bluehelix Pro is available in 2 models, both running on methane and LPG. Both the 25C model and the larger size, 32C, offer large volumes of domestic hot water, quickly, which can be further reduced by activating the "Comfort" function Strengths: Primary heat exchanger in thick AISI 316 TI stainless steel with integrated DHW production (dual stainless steel heat exchanger). Patented High yields both in heating and in sanitary production Total premix burner in stainless steel Digital control panel Electronic flame modulation both in heating and DHW Can be combined with the modulating remote timer control Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Refined design and compact size Casing painted white by anaphoresis with epoxy powders Advantages : Exchanger with "SELF-CLEANING" function which reduces limescale deposits inside the DHW circuit High yields both in heating and in sanitary production Ease of access to internal components for any maintenance ECO function in DHW for greater savings in the period of low use of hot water Maximum comfort certified 3-star in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe High efficiency modulating heating pump (Erp Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Protection index IPX5D, equivalent to excellent electrical protection of the boiler from liquids and foreign bodies Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center Appliance belonging to class 5, the most ecological required by European standards (UNI EN 297 NOX and 483) Products that fall under the tax breaks provided for by the Finance Law in force Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: By installing the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. "SELF-CLEANING" function: Thanks to the "spiral" shape, the passage of domestic water inside the exchanger produces a "centrifugal" self-cleaning effect on the internal walls which tends to remove any limescale deposits. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€713,00
RIELLO RESIDENCE CONDENS 32 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features Product code: 20096588 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 30 kW Sanitary nominal heat input: 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Dimensions (hxlxp) mm 845 x 450 x 358 ; 42 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.289,00
RIELLO RESIDENCE IN CONDENS 32 KIS LPG CONDENSING BOILER WITH FUME KIT + BUILT-IN UNIT - NEW ErP Technical features Product code: 20096732 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 268 ; 43kg Built-in dimensions (hxlxp) mm 1223 x 654 x 286 ; 24kg Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor recessed installations Residence In Condens allows for the technological level and high performance of the Residence Condens indoor version to be concealed in the wall. The innovative Riello heat exchanger, completely made of seamless aluminum, is synonymous with efficiency and durability, resistant to system dirt, offers excellent head and high heat exchange. Thermoregulation is managed directly by the boiler board and via the external probe (accessory) it allows suitably adapting the temperature of the heating system to the external climatic conditions. Residence In Condens is available with powers from 25 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Antifreeze function that protects the heating and DHW circuits down to -5°C (external and built-in versions) with the possibility of extending the protection down to -15°C (optional) The remote control panel (optional) allows you to manage the boiler directly from inside the home Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.390,00
ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Ferroli BLUEHELIX PRO RRT 32 C methane or LPG condensing boiler Complete with Lox NOx Fume Exhaust Kit - NEW Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Thermal power 80°C-60°C Max Heating: 30 / 6,3 kW Thermal power 50°C-30°C Max Sanitary: 32.5 / 6.9 kw Useful thermal efficiency 30%: 109.5 Max working pressure heating bar 3 NOx class 6 Sanitary flow rate ∆t 25°C 18.3 Protection degree (IEC 60529) IP X5D Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 BLUEHELIX PRO RRT The quality of the BLUEHELIX line is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and statutory checks > STRONG POINTS: - With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix Pro" series - DUAL STAINLESS STEEL exchanger : boiler with primary exchanger for heating and domestic hot water in very thick stainless steel integrated in a single component (DUAL). High efficiency even during DHW operation (94%). - Increased hydraulic passages of the exchanger both on the heating circuit and on the DHW circuit. - : in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) - MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) - MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits - Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace - Hydraulic connections covered by the boiler shell - Large backlit multifunction graphic display for easy and correct setting of the parameters - Standard by-pass > BENEFITS OF bluehelix PRO RRT C: - Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes - FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard - Designed to simplify and facilitate normal maintenance and cleaning operations - Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems - STOP AND GO: it is possible to delay the ignition of the burner by activating it only in the face of real withdrawals of domestic hot water - 3-star certified comfort in sanitary manufacturing according to EN 13203 - Minimum polluting emissions (class 6 according to EN 15502-1) - Sliding temperature operation via optional external probe - Low consumption modulating heating pump (ErP Ready - Class A) - Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) - Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit - Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€903,00
ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE NB THE BOILER WILL BE SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE RIELLO RESIDENCE EXTERNA CONDENS 32 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Technical features Product code: 20096735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 46 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Characteristics: Remote control panel supplied as standard Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional) "Winter with Pre-heating" function: allows the DHW exchanger to be maintained at temperature, reducing waiting times during withdrawal (instantaneous combined models) Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.920,00
RIELLO RESIDENCE CONDENS 32 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features Product code: 20096588 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 30 kW Sanitary nominal heat input: 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Dimensions (hxlxp) mm 845 x 450 x 358 ; 42 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.289,00
FERROLI BLUEHELIX K 50 32 Kw LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 20133714 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/sanitary performance DHW nominal heat input kW 25.00 Sanitary nominal thermal power kW 26.25 Nominal heat input Heating kW 20.00 Nominal thermal power Heating (80°/60°) kW 19.48 Useful efficiency Pn max - Pn min (80°/60°): 97.4 - 97.1% Useful efficiency 30% Pn max (30th return): 108% Overall electric power (max heating/DHW power): 87/97 W Supply voltage V-Hz 230-50 IP X5D degree of protection Warm-up exercise Maximum pressure: 3 bars Minimum pressure for standard operation: 0.25-0.45 bar Heating H2O temperature selection range: 20/45 ÷ 40/80 °C Pump: maximum head available for the system: 390 mbar at a flow rate of 1,000 l/h Membrane expansion tank: 10 lt Sanitary exercise Max-min pressure: 0.15/8bar Quantity of hot water: - with Δt 25°C l/min 15.1 - with Δt 30° C l/min 12.5 - with Δt 35° C l/min 10.8 Minimum domestic water flow rate l/min 2 Sanitary H2O temperature selection range °C 37-60 Dimensions Dimensions (hxwxd) mm 740 x 470 x 275 ; 35 kgs NOx class: 6 Power supply: CNG/LPG Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel General characteristics New Family: the best ever: The new Family is the Riello solution for the most demanding user. The primary exchanger, entirely made of stainless steel, guarantees maximum efficiency and reliability over time and the new optimized sanitary exchanger ensures exceptional comfort and the best class of merit (class A). The new Family is available with powers of 25, 30 and 35 kW, in instantaneous combined and heating only versions. ACC self-adaptive electronic combustion control Range Rated Approval Possibility of integration in hybrid systems via integrated ModBus protocol New panel with color display and intelligent system filling function 10 liter expansion tank High head, low consumption modulating circulator Modulation ratio 1:8 Standard flue gas flange with dedicated flue system Clapet valve and SRD device as standard Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS) and outdoors in partially protected places (IPX5D) Assembly template, hydraulic fittings, power supply cable and hole plug for interface remote control supplied Kit for REC10 remote control in supplied room Plumbing fittings with shut-off system taps, gas tap and cold water supplied Ease of installation and wide choice of accessories New primary exchanger in stainless steel Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. FAMILY IS AVAILABLE IN 3 POWER LEVELS, IN COMBINED (KIS) AND HEATING ONLY (IS) VERSIONS FAMILY 25 - KIS AND IS VERSION FAMILY 30 - KIS VERSION FAMILY 35 - KIS AND IS VERSION Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel. The characteristics of Family and its compact dimensions make it the ideal solution for both indoor and recessed installation (25 kW model) or outdoors in a partially protected place. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Intelligent system loading Through the panel it is possible to independently carry out the filling of the system, if the pressure drops below the minimum reference value. Information display In addition to the date and time, the display shows the basic information relating to boiler operation: the water delivery temperature and the system pressure. Via an icon on the display, the boiler also warns of the need to carry out scheduled maintenance. Programming Programming boiler operation according to your needs is easy and intuitive. From the panel it is possible to carry out the hourly and daily programming for each zone of the system. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.731,00
RIELLO RESIDENCE IN CONDENS 32 KIS METHANE CONDENSING BOILER WITH FUME KIT + BUILT-IN UNIT - NEW ErP Technical features Product code: 20096732 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 268 ; 43kg Built-in dimensions (hxlxp) mm 1223 x 654 x 286 ; 24kg Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor recessed installations Residence In Condens allows for the technological level and high performance of the Residence Condens indoor version to be concealed in the wall. The innovative Riello heat exchanger, completely made of seamless aluminum, is synonymous with efficiency and durability, resistant to system dirt, offers excellent head and high heat exchange. Thermoregulation is managed directly by the boiler board and via the external probe (accessory) it allows suitably adapting the temperature of the heating system to the external climatic conditions. Residence In Condens is available with powers from 25 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Antifreeze function that protects the heating and DHW circuits down to -5°C (external and built-in versions) with the possibility of extending the protection down to -15°C (optional) The remote control panel (optional) allows you to manage the boiler directly from inside the home Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.429,00
ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE RIELLO RESIDENCE EXTERNA CONDENS 32 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Technical features Product code: 20096735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 46 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Characteristics: Remote control panel supplied as standard Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional) "Winter with Pre-heating" function: allows the DHW exchanger to be maintained at temperature, reducing waiting times during withdrawal (instantaneous combined models) Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.920,00
You have seen 12 out of 29 products
