FERROLI BLUEHELIX K 50 32 Kw METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XXL Nominal thermal power 29 kW DHW thermal capacity 32 kW Auxiliary electricity consumption at full load: 0.054 kW Sound power level within 55 dB Dimensions (HxWxD) 800 x 600 x 420 *Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre BLUEHELIX K50 32 EFFICIENCY, RATIONALITY AND ROBUSTNESS New series of condensing boilers with which FERROLI intends to satisfy the increasingly stringent limits on energy consumption required by recent regulations. The range of generators has been designed with the new patented AISI 316 TI stainless steel exchanger capable of guaranteeing energy efficiency and performance, both in heating and in the supply of domestic hot water, at the top of its category, in compliance with the new directives ErP for eco-friendly design and labelling. CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: - System start-up from cold: faster start-up with full control of the thermal load on the components - Permanent maintenance of temperature equilibrium conditions, once the set point has been reached - Better operation in extreme conditions (e.g. at minimum power), reduction of on-oFF states - Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: - The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. - Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. - Self-protection function in case of overheating - Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. > SLIDING TEMPERATURE OPERATION With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. > ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. > ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. > ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. > ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.670,00
FERROLI BLUEHELIX PRO S 32C KW GAS CONDENSING BOILER WITH METHANE OR LPG COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Heating ERP class: A Healthcare ERP class: A Load profile: XL Heating capacity (PCI) Min / Max Heating 6.7/29.2/32 kW Heating power 80°C-60°C Min / Max Heating6.6/28.9/32 kW Useful thermal efficiency 80°C-60°C Pmax % / Pmin % 98.8/97.8 Useful thermal efficiency 30% load: 108.8% Domestic hot water production Δt 30°C/Δt 25°C: 15.3/18.3 l/min Heating working pressure Max / Min bar 3 / 0.8 Empty weight kg 31.5 Dimensions (HxWxD): 700x420x320 mm Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre BLUEHELIX PRO S SMALL FOOTPRINT, GREAT PERFORMANCE ... FULL CONDENSATION BLUEHELIX PRO S has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. The galvanized sheet casing, supplied separately from the boiler body, has been designed to facilitate access to the hydraulic connections and to allow the smoke ducts and air intake pipes to exit on each side of the same. Bluehelix Pro S achieves one of the highest energy efficiency of space heating in its category: ηs 94%. Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+. Strengths: It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% A+ SYSTEM: in combination with the Romeo modulating remote timer control and the external probe Primary exchanger in thick Aisi 316 Ti stainless steel with integrated sanitary production (dual stainless steel exchanger) Total premix burner in stainless steel Digital control panel Electronic flame modulation both in heating and DHW Can be combined with the modulating remote timer control Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Advantages: Exchanger with "SELF-CLEANING" function which reduces limescale deposits inside the DHW circuit High yields both in heating and in sanitary production Ease of access to internal components for any maintenance ECO function in DHW for greater savings in the period of low use of hot water 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 Sliding temperature operation via optional external probe Low consumption modulating heating pump (Erp Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. Functions: ECO-COMFORT function In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function BLUEHELIX PRO S has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from 1 August 2015 are equipped with a low-consumption circulator, otherwise defined as "class A". It is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, i.e. by analyzing the impact of the low-consumption circulator integrated in the boiler, it reduces up to 30% of the total electricity consumption of the generator. max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure max speed high efficiency circulator: 19 € Therefore, with the replacement of standard boilers with Bluehelix Pro S, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. .
€806,00
UNICAL X 32 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 33.6 - 5.4 Seasonal heating energy efficiency of environment ?s % 93 Seasonal EFFICIENCY CLASS for heating A Useful thermal power in high temperature regime. (Tr 60°C / tm 80°C) P4 kW 31.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) ?4 % 87.7 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 10.4 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) ?1 % 97.8 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS A Production DHW cont. Dt 25 K (mixed) l/min 18.2 Expansion vessel capacity l 10 Max condensate production kg/h 5.2 Heating circuit pressure (min/max) bar 3.0 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 41 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.050,00
ATTENTION ! In case of immediate lack of availability, the product will be ordered and shipped within 10 working days Technical features Model: D2CND035 Heating Efficiency class (55°C) : A Fireplace power (Qn) kW 4.8 : 34 Rated power (80°/60°C) 4.6 : 33.2 kW Nominal power (50°/30°C) 5.2 : 35 kW Heating efficiency : Up to 108.7% Modulation range : 1:7 Expansion vessel volume: 10 litres Domestic hot water Efficiency class : A Withdrawal profile : XL Temperature range : 35°C ~ 60°C Withdrawal in continuous service (∆T=30°C): 16 l/min Withdrawal in continuous service (∆T=25°C): 19.2 l/min Water mains pressure: 10-0.5 Bar Technical data Power supply (V,Hz, Ø) : 220~240/50/1 Electric Power Input: 3.5~86W Sound power : 52 dB(A) NOx class : 6 Electrical protection class : IP X5D Installation data Flue diameter: 60/100 mm Maximum length for flue system DN 60/100 : 7.6 m Maximum length for flue system DN 80/125 : 34.4 m Maximum length for flue system DN 80/80 : 54 m Dimensions and weight Dimensions (HxWxD): 695x440x295 mm Weight : 37Kg Simply Serene Guarantee To guarantee you maximum serenity, DAIKIN has studied "SIMPLY SERENIOUS", an extension of the guarantee up to the 5th year of life of your product, which provides for the subscription of a Scheduled Maintenance Plan with specialized Daikin technicians Ultra-compact Daikin D2C condensing boilers for heating and DHW production Why choose a condensing boiler? Daikin condensing boilers are a good solution for those wishing to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the D2C and Full condens and Full Condens TOP wall-hung boilers, to the GCU boiler with built-in thermal storage, to the A2 floor-standing diesel boiler Thanks to the special Daikin-patented exchanger, the D2CND boiler obtains high specific power and high partialization to guarantee comfort and efficiency in any operating mode and in minimum encumbrance. The D2T version, heating only, integrates a diverter valve and can be connected directly to a storage tank for the production of domestic hot water . Ultra-compact and elegant technology The beautifully compact boiler The new D2C condensing boilers are 100% Daikin design. The ultra-compact dimensions make them suitable for even the smallest apartments, where every centimeter saved is space gained A boiler for every need D2C boilers are available in 3 combi versions 24, 28 and 35 kW for heating and instant domestic hot water production. A wide range of heating-only boilers is also available, the D2T, in 5 sizes, from 12 to 35 kW, which can be combined with a storage tank for the production of domestic hot water. You can install them virtually anywhere thanks to their compact size and minimal installation space required. Thanks to the IPX5D degree of electrical protection and the antifreeze kit, they can also be installed outdoors. Do you want to have your heating system under control even when you are not at home? Pair the Lan Adapter to control via APP ! Efficiency and respect for the environment The combustion system with regulation via Lambda Gx probe automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimal polluting emissions . Maximum comfort Thanks to a high modulation ratio, up to 1:8 , the output power is automatically varied to always adapt, instant by instant, to the real need of the house in which it is installed. Endless showers? Domestic hot water will no longer be a problem with the D2C boiler with a DHW flow rate of up to 19 l/min in the 35 kW version Cutting-edge technology combines with an attractive and user-friendly user interface Daikin Eye An elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. In the event of a fault, the LED turns red and the error code is displayed. The easiest way to interact with your boiler! Daikin Heating Online Controller The heating system is always under control, wherever you are! Thanks to the Daikin Heating Online Controller application you can now control and monitor your boiler from the comfort of your smartphone in a simple and intuitive way Monitor The status of your heating system The ambient temperature in your home Energy consumption graphs. Plan The temperature of your home and the operation of the boiler with up to 6 actions per day for 7 days Vacation mode Check it out The operating mode and the set room temperature The system and the production of domestic hot water By integrating third-party products and services through IFTTT services (if this then that) Changing your old boiler has never been easier! Thanks to its small size and IPX5D degree of protection, Daikin D2C can be installed practically anywhere. Its ultra-compact dimensions make it suitable for even the smallest apartments, where every centimeter saved is space gained and its elegant shapes look good in the kitchen. A distinctive element of the 100% Daikin design is also the Daikin Eye: an elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. Daikin D2C contains the best of condensing technology. The SCOT combustion regulation system automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions. Dimensions and weight reduced to a minimum are possible thanks to the innovative Daikin patented high specific capacity air/fume exchanger body. Heart of the new D2C boiler, it has been designed to obtain the highest thermal power in the smallest size. Functions Eco Mode Return temperature control to optimize condensation Warm start DHW exchanger already heated and ready for use thanks to the memorization of the habits which allows to anticipate the request for domestic hot water Solar connection If the water entering the boiler has been preheated by the solar system, the burner does not ignite, for optimal integration of the solar source Exclusive initiative for Daikin customers On the occasion of the launch of the new Daikin D2C, starting from 1 March 2017 Daikin is giving away the activation cost of Simply Serene. The offer is valid for all those who will purchase a Daikin boiler of any type and who already own a Daikin mono split or multisplit. All the details on daikin.it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.163,00
Fondital ITACA KC 32 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - methane Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 108.3% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l Heating consumption at nominal power Natural gas m3 /h 3.22 DHW consumption at nominal power Natural gas m3 /h 3.65 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 40kg METHANE power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion vessel Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.821,00
ATTENTION THIS PRODUCT IS MADE TO ORDER. THE GOODS WILL BE SHIPPED WITHIN 10 WORKING DAYS FROM THE ORDER Fondital Formentera KC 32 condensing boiler complete with Low NOx LPG fume exhaust kit Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 106.2% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 750x420x315 mm; 40.5kg LPG power supply Warranty: 2 years FORMENTERA Formentera KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, high efficiency and low emissions of pollutants. PLUS Modulation ratio 1:9 Touch screen user interface Standard management of 2 types of solar thermal system Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates TECHNICAL FEATURES Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant air/gas ratio Variable speed combustion fan 3-speed circulator with built-in deaerator 10 liter heating expansion tank Motorized diverter valve Installation flexibility thanks to the IPX5D electrical protection degree Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Availability of the boiler change kit as an accessory Efficiency classification according to 92/42/EEC: ★★★★ NOx emission class (EN 297): 5 Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.510,00
AVAILABLE TO ORDER IMMERGAS VICTRIX SUPERIOR 32 KW CONDENSING COMPLETE WITH KIT FOR LPG FUME EXHAUST - NEW ERP Technical features Product code: 3.025503 Type: INSTANT condensing boiler Energy efficiency Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Rated useful power: 32 kW Hot water production (∆t 30 °C) l/min: 15.3 Nominal / (real) system expansion tank capacity liters 8.0 / (5.8) System expansion vessel pre-charge pressure bar 1.0 Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16) Useful thermal power for hot water production kW (kcal/h) 32.0 (27,520) DHW adjustable temperature °C 30 - 60 DHW circuit minimum dynamic pressure bar 0.3 DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min Characteristics Power supply V/Hz 230 - 50 Nominal absorption A 0.78 Power absorbed in stand-by W 5.5 Electrical insulation degree IP X5D Dimensions Dimensions (HxWxD): 835 x 440 x 350 VICTRIX SUPERIOR Low consumption: the modulating circulator automatically adapts operation to the conditions of use and reduces electricity consumption. Maximum domestic comfort: the 2-litre micro-accumulator speeds up hot water delivery and reduces waiting times compared to other instantaneous boilers. High seasonal yields: the wide modulation range of the boiler allows high seasonal yields with a consequent reduction in gas consumption. Display: large, backlit liquid crystal, provides the main operating information. Thermoregulators: optional. They improve comfort and increase energy savings. Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: can be combined with solar systems. High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze up to -3 °C. OTHER CHARACTERISTICS: HIGH HYDRAULIC PERFORMANCE With the low energy consumption modulating circulator and the possibility of setting the ∆t on the system, these boilers are ideal on systems equipped with zone and thermostatic valves, to enhance the condensing operation of the appliance, reducing consumption energetic. HIGH EFFICIENCY IN ALL SEASONS Even in mid-season, when energy absorption is limited, efficiency is still high and running costs are reduced thanks to the modulation range from 12.5% to 100% of the power. TECHNOLOGY AND SIMPLICITY OF USE The large and functional backlit liquid crystal display allows easy reading of all the main information relating to operation. Two practical knobs allow you to control the appliance. § INSTALLATION FLEXIBILITY With 19 cm of space between the water connections and the wall, it can be easily installed in any replacement; moreover, the boilers are designed for internal or external installation in partially protected places. The standard antifreeze protection is down to -3 °C and can be extended, with a suitable optional kit, down to -15 °C. Warranty The guarantee on this article is 24 months from the date of purchase.
€2.598,00
AVAILABLE TO ORDER IMMERGAS VICTRIX 32 TT CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 32 TT condensing boiler Capacity: 32Kw Useful heating power kW: 30.0 DHW useful power kW: 31.5 Type: snapshot Modulation range: 15 - 100% Hot water production (∆t 30 °C) l/min: 15 , 0 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x280 mm Weight: 33Kg *For conversion to LPG, contact the Authorized Assistance Centre VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources in the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code. Product Guarantee The warranty on this item is 24 months from the date of purchase.
€1.408,00
Technical features: Heating energy efficiency Class A; Sanitary energy efficiency profile XL Class A; Nominal heat input 25 kW; Sanitary thermal capacity: 32 kW; Nominal thermal power 6 kW; Expansion capacity: 10 l; Quantity of hot water with Δt=25°C: 18 l/min; flow rate sanitary water: 2 l/min; Sanitary water temperature: 35 - 60°C; Power supply: Methane NOx class 5; Max temperature pressure /°C3/90 bar; Pressure (min./max.): -/8 bar; Boiler capacity: 60 l; Pump: from max system to flow rate mbar /lt/h 375 / 1000; Smoke exhaust kit; General characteristics Effective and Safe The boiler is made up of control systems for the presence of the flame, the correct emission of fumes, temperatures and pressures. It is also equipped with a circulator and a three-way valve with anti-blocking cycles which guarantee correct operation. The boiler allows climatic regulation, which can be activated via the external probe set up for connection to the Beretta remote control panel (optional) which allows you to easily check and check the status of the appliance. High technology Mynute Boiler Green, thanks to the stainless steel kettle, is able to dispense a lot of hot water. The accumulation is equipped with a magnesium anode to offer protection against stray currents and, thanks to the wide flange, the boiler is easily inspectable. To reduce gas consumption, protective insulation is used which prevents the water from cooling down, minimizing the need to ignite the burner to bring the storage back up to temperature. Mynute Boiler Green also offers a standard DHW expansion vessel and is equipped with a predisposition for DHW recirculation (via optional kit). Thanks to the display on the dashboard, information on the status of the appliance is immediately available. Filling the system is easy to do through the appropriate tap. The new Mynute Boiler Green is equipped with a simple control panel. Composed Two knobs that allow you to select all the functions necessary for using the boiler. The heating knob also allows activation of the Amico Climate System. FRIENDLY CLIMATE system: And the function that manages according to the external climatic situation, regulates the temperature inside the house, in fact it is active only when the delivery temperature in heating mode is set between 55 and 65 °C, in fact it automatically increases by 5 ° C every 20 minutes if heat is required. Dimensions (HxWxD): 950x600x450mm; 61kg
€2.295,00
Riello Replexa 32 kis condensing boiler complete with methane low NOx fume exhaust kit - NEW Energy class in heating A Energy class in sanitary A XL load profile Heating nominal heat input kW 29.00 DHW nominal heat input kW 31.60 Useful efficiency (80°-60°) pn max. - pn min. % 96.9 - 97.4 Supply voltage V - Hz 230-50 IP X5D degree of protection Maximum heating pressure bar 3 Expansion vessel l 8 Maximum pressure bar 8 Hot water production with t+25 °cl/min 18.1 Dimensions (H×W×D) mm 740X420X275 Replexa Compact, reliable and versatile, REPLEXA is the ideal boiler for carefree replacement. Specially designed by Riello for quick and easy installation, REPLEXA comes with a wide range of accessories that allow it to be placed both inside the home, outside (in partially protected places) and recessed (KIS models). . Equipped with DIN standard hydraulic connections, REPLEXA is the right answer for those who want to replace their old boiler with a Riello model. The new range, thanks to the modern and essential aesthetics, in line with the new generation Riello products, integrates easily into any living environment, even in new buildings. So many features and pluses of Replexa, all to be discovered, which will soon be appreciated by both the user and the installer. TECHNOLOGICAL AND RELIABLE RIELLO REPLEXA IS CANDIDATE TO REPRESENT A NEW REFERENCE IN THE REPLACEMENT SEGMENT The new range guarantees low consumption and good energy efficiency, reaching class A, both in heating and DHW. A vast range of accessories makes REPLEXA the ideal choice in case of replacement, responding to the various installation needs. Ease of use and installation, together with the reliability that has always characterized the Riello offer, complete the profile of REPLEXA, which will soon be appreciated on the market by both users and installers. LOW NOX EMISSIONS: CLASS 6 (UNI EN 15502) MODULATION RANGE 1 : 5 ALUMINUM CONDENSING EXCHANGER 8 LT EXPANSION TANK, SIDE INCREASED PLATE EXCHANGER, FOR EXCELLENT SANITARY COMFORT MODELS 25 KIS - 25 IS C10 APPROVED. FUME CLAP (NON-RETURN VALVE) AVAILABLE AS AN ACCESSORY ELECTRICAL PROTECTION DEGREE IPX5D COMPATIBLE WITH AIR-PROPANE GAS (25 KIS AND 25 IS MODELS) AND LPG, THROUGH OPTIONAL KITS Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.035,00
For conversion to LPG, contact your local Authorized Assistance Centre Technical features Model : Victrix 32 TT PLUS Product code : 3.025515 Sanitary Energy Efficiency Class: A Load profile : XL Maximum nominal heat input in DHW: 34.9 kW Maximum nominal heat input in heating mode: 32.7 kW Maximum useful power in domestic hot water: 34.2 kW Maximum useful power in heating: 32.0 kW Minimum useful thermal power: 3.9 kW Useful thermal efficiency at 100% Pn (80/60 °C) : 97.8% Useful thermal efficiency at 30% of the nominal load. (80/60°C) : 103.2 kW Useful thermal efficiency at 100% Pn (40/30 °C) : 106.2% Useful thermal efficiency at 30% of the nominal load. (40/30°C) : 108.2% Specific flow rate in continuous domestic hot water service (∆T 30 °C): 23.3 l/min Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IP X5D Dimensions and weight Dimensions (HxWxD): 748x440x255mm Empty weight: 32.4 kg Immergas Victrix TT PLUS Instant mural High hydraulic performance The innovative condensing module guarantees high flow rate, low risk of clogging due to impurities in the system water, greater resistance to corrosion thanks to the special alloy Storage tank Pre-arranged as standard for combination with a storage tank with a capacity of 80 to 2000 litres, it guarantees a high production of hot water Fan heater unit The combination with a water heater allows for rapid heating of the rooms. Ideal for workshops, premises for public use, gyms, etc. High seasonal yields The wide modulation field of the boiler allows high seasonal yields with a consequent reduction in gas consumption Optional thermoregulators They improve comfort and increase energy savings. Optional DOMINUS App Simple and intuitive, it allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet Formula Comfort 10 Takes advantage of the most complete 10-year maintenance program with no activation costs, with the possibility of extending it up to 15 years. In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Eco-friendly technology Complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production Ecological class 5 The best for reduced emissions of nitrogen oxides Renewable energies Using a boiler with a capacity of 120 liters or more, the boiler can be connected to solar thermal systems for a greater production of hot water. It can also be combined with hybrid systems with heat pump Maximum flexibility Approved to operate indoors, recessed and outdoors even in the open. IPX5D electrical protection. Standard antifreeze down to -5 °C Maximum compactness Only 25 cm deep Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.813,00
Technical features Model : Victrix Zeus 32 Product code : 3.028382 Energy class in heating: A Sanitary energy class: A Load prifle : XL Maximum nominal heat input in DHW: 33.1 kW Maximum nominal heat input in heating mode: 29.0 kW Minimum nominal heat input: 4.3 kW Maximum useful thermal power in DHW: 32 kW Maximum useful thermal power in heating: 28 kW Minimum useful thermal power: 4.0 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 96.6% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 100.4% Minimum gas flow rate to the burner: 0.45 m 3 /h Maximum gas flow rate to the burner: 3.50 m 3 /h Weighted CO : 19 mg/kWh Weighted NO X : 38 mg/kWh Power supply: methane / LPG NO x class : 6 Minimum suction/exhaust available head: 2 Pa Maximum suction/exhaust available head: 250 Pa Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 900x580x410 mm Empty weight: 65.5 kg Immergas Victrix Zeus Comfort and design in a small space The new VICTRIX ZEUS are condensing and total premix boilers with stainless steel boiler, compact dimensions and new design, completely renewed With 25 and 32 kW of power , they are designed for new installations, but the identical hydraulic connections compared to the previous models and the standard connection group, favor installers in replacements . In addition, the condensing module with large section stainless steel coil reduces the risk of clogging and the low-consumption circulator allows for considerable savings in electricity Thanks to the electronic card that modulates the boiler power up to 17%, high yields are obtained with a consequent reduction in gas consumption . VICTRIX ZEUS, which can also be installed outdoors in protected places such as under the balcony, can be fed with any type of fuel (methane/LPG or propane air), which is why they are supplied with a single product code In addition to allowing the fumes to be discharged from the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014, the VICTRIX ZEUS are in the most ecological class of the European classification ( class 6 ) for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). For ease of use by users, the interface with LCD display and knobs, offers simple and fast adjustments and settings Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Smartech Plus Home temperature is now smart Evolution advances rapidly with the new Immergas SMARTECH PLUS digital chronothermostat: now the heating system communicates in the most immediate way with the home and those who live there also via smartphone and computer, comfort increases and consumption is under control SMARTECH PLUS is the intelligent chronothermostat with Bluetooth technology, which allows you to adjust the heating temperature through a dedicated app. Thanks to the geolocation system , it connects to smartphones and lets you know when no one is home or if even just one member of the family returns, in order to set the desired temperature It is compatible, for some functions, with the virtual assistants Alexa and Google Home The advantages of Smartech Plus • Remote adjustment With the display or remotely with the dedicated app (internet or Wi-Fi connection required) • Switching on and off At time slots or with the geolocation of family members on the app • Complete control of operation, consumption, modification of parameters and display of anomalies on the website • Easy to use and read Perfect visibility with e-ink technology of digital readers, consumes very little and runs on batteries that last even more than 2 years • Up to 18 thermostats With the app you can manage up to 18 smart thermostats in different homes 45 liter stainless steel boiler The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange Multiple withdrawals of domestic hot water The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the marking, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous withdrawals of domestic hot water Sanitary expansion tank as standard Approved for outdoor use Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to 0 °C, the VICTRIX ZEUS boilers can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D Primary exchanger in stainless steel The primary exchanger that equips the VICTRIX ZEUS is made with a single-tube exchange coil in stainless steel . The absence of collectors and circuits in parallel guarantees maximum reliability over time : there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops . The internal section, wide and constant , allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water, in the case of replacing boilers on dated systems Due to this peculiarity, the VICTRIX ZEUS are ideal for replacement "Green series" plug-in flue The VICTRIX ZEUS have a dedicated series of air intake/fume exhaust kits made in such a way as to guarantee high resistance to corrosion and considerable speed and functionality during installation, thanks also to the plug-in coupling system and sealing gaskets. held in special material. VICTRIX ZEUS boilers can be installed in sealed chamber and forced draft or open chamber and forced draft configuration, ideal for outdoor installation in a partially protected place Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.700,00
You have seen 24 out of 29 products
