icon Baxi Condensing Gas Boiler Model Nuvola Duo-Tec+ 33 Ga Ves With 40 Liters Methane Or LPG Accumulation Complete With Smoke / LPG Exhaust Kit | CaldaieMurali

Baxi Condensing Gas Boiler Model Nuvola Duo-Tec+ 33 Ga Ves With 40 Liters Methane Or LPG Accumulation Complete With Smoke / LPG Exhaust Kit

Description

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE

Technical features

  • ErP energy efficiency class (heating and DHW): A
  • Load profile: XL
  • DHW nominal heat input kW 34
  • Heating nominal heat input kW 28.9
  • Sanitary nominal thermal power kW 33
  • Useful efficiency (pci) Pn - average temperature 70°C: 97.7%
  • Heating expansion vessel capacity l 7.5
  • Storage tank expansion vessel capacity l 2
  • Sanitary water temperature adjustment °C 35-60
  • Boiler capacity 40 l
  • Sanitary water production ∆T 25°C l/min 18.9
  • Domestic hot water production at discharge ∆T 30°C (1) l/30' 500
  • Degree of protection: IPX5D
  • NOx class (EN 483) 5
  • Dimensions (hxlxp): 950x600x466 mm ; 67.5 kgs
  • Power supply: CNG or LPG
* Operation with LPG through adjustment by the Authorized Service Centre


Cloud Duo-Tec+

Digital control panel

Baxi

The Duo-tec E range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way.


Efficiency and savings

Wide modulation range:

  • greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions
  • adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises

GAC Gas Adaptive Control

Baxi

It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values.

Advantages:

  • there are no manual interventions – reduced measurements, calibrations
  • with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant
  • the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions.

Fully modulating pump with de-aeration

The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs.

During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc.


Guidelines in case of replacement of a conventional boiler with a new condensing one

There are two main problems that can be encountered:

  • Flues and smoke exhaust duct
  • Condensate drain

To overcome the above, Baxi recommends:

the use of a Ø50 mm exhaust pipe

Baxi

Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models).

For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes.

(*) Each Ø50 mm diameter bend decreases the length of the drain by 4m


the use of the condensate drain pump

Baxi

Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes.


Characteristics :

  • Wide modulation range 1:7 greater efficiency and silence
  • GAC (gas adaptive control): automatic combustion control
  • Up to 500 l of hot water in 30 minutes (ΔT 30°C)
  • 40 l stainless steel kettle
  • Digital control panel with large backlit LCD display
  • Compatibility with the Baxi Mago (optional accessory) for remote boiler control
  • DHW expansion vessel available as STANDARD (for 33 kW mod.) and as an accessory (for 24 kW mod.)
  • Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW total length 40 meters (intake+exhaust)
  • STANDARD installation kit (gas cock / DHW inlet / telescopic fittings)

hydraulic system

  • Electric three-way diverter valve
  • Pre-mix burner in stainless steel
  • Flue water exchanger in stainless steel
  • Stainless steel kettle
  • Modulating fan with electronic speed variation
  • Automatic by-pass
  • High efficiency circulation pump with total modulation
  • Pump anti-blocking system and three-way valve which intervenes every 24 hours
  • Heating circuit safety valve at 3 bar
  • 8 bar boiler safety valve
  • Sanitary expansion vessel (2 litres) standard for mod. 33 GA VES
  • Sanitary recirculation arrangement

Thermoregulation system

  • Standard climate control (with external probe available as an option)
  • Arrangement for connection to a zone system

Control system

  • Safety thermostat against overheating of the water/fumes exchanger
  • Hydraulic pressure switch which blocks the gas in case of water shortage
  • Safety thermostat against fume overheating
  • Temperature control using NTC probes
  • Anti-legionella function
  • Total antifreeze device
  • Electronic thermometer
  • Heating circuit digital pressure gauge

Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Baxi Condensing Gas Boiler Model Nuvola Duo-Tec+ 33 Ga Ves With 40 Liters Methane Or LPG Accumulation Complete With Smoke / LPG Exhaust Kit

Product form

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI... Read more

€1.763,00 Incl. VAT

    Description

    ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE

    Technical features

    • ErP energy efficiency class (heating and DHW): A
    • Load profile: XL
    • DHW nominal heat input kW 34
    • Heating nominal heat input kW 28.9
    • Sanitary nominal thermal power kW 33
    • Useful efficiency (pci) Pn - average temperature 70°C: 97.7%
    • Heating expansion vessel capacity l 7.5
    • Storage tank expansion vessel capacity l 2
    • Sanitary water temperature adjustment °C 35-60
    • Boiler capacity 40 l
    • Sanitary water production ∆T 25°C l/min 18.9
    • Domestic hot water production at discharge ∆T 30°C (1) l/30' 500
    • Degree of protection: IPX5D
    • NOx class (EN 483) 5
    • Dimensions (hxlxp): 950x600x466 mm ; 67.5 kgs
    • Power supply: CNG or LPG
    * Operation with LPG through adjustment by the Authorized Service Centre


    Cloud Duo-Tec+

    Digital control panel

    Baxi

    The Duo-tec E range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way.


    Efficiency and savings

    Wide modulation range:

    • greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions
    • adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises

    GAC Gas Adaptive Control

    Baxi

    It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values.

    Advantages:

    • there are no manual interventions – reduced measurements, calibrations
    • with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant
    • the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions.

    Fully modulating pump with de-aeration

    The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs.

    During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc.


    Guidelines in case of replacement of a conventional boiler with a new condensing one

    There are two main problems that can be encountered:

    • Flues and smoke exhaust duct
    • Condensate drain

    To overcome the above, Baxi recommends:

    the use of a Ø50 mm exhaust pipe

    Baxi

    Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models).

    For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes.

    (*) Each Ø50 mm diameter bend decreases the length of the drain by 4m


    the use of the condensate drain pump

    Baxi

    Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes.


    Characteristics :

    • Wide modulation range 1:7 greater efficiency and silence
    • GAC (gas adaptive control): automatic combustion control
    • Up to 500 l of hot water in 30 minutes (ΔT 30°C)
    • 40 l stainless steel kettle
    • Digital control panel with large backlit LCD display
    • Compatibility with the Baxi Mago (optional accessory) for remote boiler control
    • DHW expansion vessel available as STANDARD (for 33 kW mod.) and as an accessory (for 24 kW mod.)
    • Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW total length 40 meters (intake+exhaust)
    • STANDARD installation kit (gas cock / DHW inlet / telescopic fittings)

    hydraulic system

    • Electric three-way diverter valve
    • Pre-mix burner in stainless steel
    • Flue water exchanger in stainless steel
    • Stainless steel kettle
    • Modulating fan with electronic speed variation
    • Automatic by-pass
    • High efficiency circulation pump with total modulation
    • Pump anti-blocking system and three-way valve which intervenes every 24 hours
    • Heating circuit safety valve at 3 bar
    • 8 bar boiler safety valve
    • Sanitary expansion vessel (2 litres) standard for mod. 33 GA VES
    • Sanitary recirculation arrangement

    Thermoregulation system

    • Standard climate control (with external probe available as an option)
    • Arrangement for connection to a zone system

    Control system

    • Safety thermostat against overheating of the water/fumes exchanger
    • Hydraulic pressure switch which blocks the gas in case of water shortage
    • Safety thermostat against fume overheating
    • Temperature control using NTC probes
    • Anti-legionella function
    • Total antifreeze device
    • Electronic thermometer
    • Heating circuit digital pressure gauge

    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 35.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane/LPG
    • marca: BAXI
    • metri quadri : 220
    • modello: Nuvola Duo-Tec+ 33
    • potenza in kw: 33
    • potenza nominale: 33
    • superficie riscaldabile mq: 220
    • tipologia : Ad accumulo
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account