icon Accoroni Ghibli 4 Elite Electronic Gas Radiator 3.35 Kw Methane Or LPG | CaldaieMurali

Accoroni Ghibli 4 Elite Electronic Gas Radiator 3.35 Kw Methane Or LPG

Description

Accoroni Ghibli 4 Elite gas radiator electronic 3.35 kW Methane or LPG


  • Thermal power 3.35 kW
  • Fan air flow 110 m3h
  • Gas supply diameter G 3/8"
  • Feed diameter air/flue gas outlet mm 65
  • Power supply 230V/1/50Hz
  • Absorbed power W 47
  • Sound level at 3 m dBA 29
  • Dimensions WxHxD 717x267x534
  • THE SUPPLY INCLUDES: LPG conversion kit, intake/exhaust pipe, dehumidification tray, exhaust terminal, gas cock.

Ghibli

The cover is made of epoxy powder coated steel sheet, with side panels in heat-resistant nylon. The two grilles for air intake and delivery are located respectively in the lower area and in the upper area of ​​the casing. The control panel is located on the front of the appliance, which includes:

- the on/off switch
- the convection fan speed switch (models 5 and 6)
- the release button of the burner command and control box
- the block status (red) and heat request (green) light signaling LEDs
- the room thermostat adjustment knob

In the back you will find:

- the connection for the combustion air inlet and combustion products evacuation duct
- the holes for fixing the appliance to the wall

Inside the appliance you will find:

- the combustion chamber and the finned heat exchanger with the fume extraction fan located downstream of the circuit
- the atmospheric burner with axial flame development complete with ignition and flame detection electrode
- the tangential convection fan in the GHIBLI 4 Elite model and the centrifugal type with double impeller and central motor in the Ghibli 5 and 6 Elite models
- the fan control and safety thermostat
- the electrical panel including the burner control equipment, the gas unit and the room thermostat

The GHIBLI ELITE gas radiator is ideal for heating or integrating space heating, even for occasional use in buildings to be renovated and holiday homes. ELITE IN SAFETY The special steel combustion chamber is completely sealed and in depression, with the fan placed downstream of the combustion circuit, to make the appliance extremely safe.

1) Sealed combustion circuit with respect to the environment
2) Circuit under depression with respect to the environment
3) The combustion circuit of the appliance, thanks to the fumes extraction fan placed upstream, is constantly under depression with respect to the environment in which it is installed. In this way, any deterioration in the tightness of the circuit (due exclusively to anomalous operating conditions) will never cause the release of unburnt or toxic gases into the internal environment.


ELITE IN CONSTRUCTION

The nickel-plated exchanger is equipped with special fins to increase the efficiency of the heat exchange. The particular design of the burner allows a low value of polluting emissions of both CO and NOx. The suitably studied geometry of the shell allows for external contact temperatures (even accidental) in line with the strictest regulations. The chamber made entirely of steel with a nickel-plating treatment makes the Ghibli Elite gas radiator extremely resistant, long-lasting and pleasing to the eye. Thanks to the use of high air flow rate fans with reduced number of revolutions, a comfortable air outlet temperature and good silence are obtained, without the danger of getting burned if the external covering mantle is accidentally touched.


ELITE IN DIMENSIONS

The dimensions are the most compact ever among the products on the market. The very low height allows easy installation under the window. SPLITTER With the splitter it is possible to solve the problems due to the positioning of the smoke outlet. The intake and exhaust ducts are separated and can cover distances of up to 3m each. Using the 90° bends it is possible to bring the ducts sideways. For each bend it will be necessary to reduce the total length of the 3 m air duct by 50 cm.

Product Guarantee

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Accoroni Ghibli 4 Elite Electronic Gas Radiator 3.35 Kw Methane Or LPG

Product form

Accoroni Ghibli 4 Elite gas radiator electronic 3.35 kW Methane or LPG Thermal power 3.35 kW Fan air flow 110... Read more

€561,80 Incl. VAT

    Description

    Accoroni Ghibli 4 Elite gas radiator electronic 3.35 kW Methane or LPG


    • Thermal power 3.35 kW
    • Fan air flow 110 m3h
    • Gas supply diameter G 3/8"
    • Feed diameter air/flue gas outlet mm 65
    • Power supply 230V/1/50Hz
    • Absorbed power W 47
    • Sound level at 3 m dBA 29
    • Dimensions WxHxD 717x267x534
    • THE SUPPLY INCLUDES: LPG conversion kit, intake/exhaust pipe, dehumidification tray, exhaust terminal, gas cock.

    Ghibli

    The cover is made of epoxy powder coated steel sheet, with side panels in heat-resistant nylon. The two grilles for air intake and delivery are located respectively in the lower area and in the upper area of ​​the casing. The control panel is located on the front of the appliance, which includes:

    - the on/off switch
    - the convection fan speed switch (models 5 and 6)
    - the release button of the burner command and control box
    - the block status (red) and heat request (green) light signaling LEDs
    - the room thermostat adjustment knob

    In the back you will find:

    - the connection for the combustion air inlet and combustion products evacuation duct
    - the holes for fixing the appliance to the wall

    Inside the appliance you will find:

    - the combustion chamber and the finned heat exchanger with the fume extraction fan located downstream of the circuit
    - the atmospheric burner with axial flame development complete with ignition and flame detection electrode
    - the tangential convection fan in the GHIBLI 4 Elite model and the centrifugal type with double impeller and central motor in the Ghibli 5 and 6 Elite models
    - the fan control and safety thermostat
    - the electrical panel including the burner control equipment, the gas unit and the room thermostat

    The GHIBLI ELITE gas radiator is ideal for heating or integrating space heating, even for occasional use in buildings to be renovated and holiday homes. ELITE IN SAFETY The special steel combustion chamber is completely sealed and in depression, with the fan placed downstream of the combustion circuit, to make the appliance extremely safe.

    1) Sealed combustion circuit with respect to the environment
    2) Circuit under depression with respect to the environment
    3) The combustion circuit of the appliance, thanks to the fumes extraction fan placed upstream, is constantly under depression with respect to the environment in which it is installed. In this way, any deterioration in the tightness of the circuit (due exclusively to anomalous operating conditions) will never cause the release of unburnt or toxic gases into the internal environment.


    ELITE IN CONSTRUCTION

    The nickel-plated exchanger is equipped with special fins to increase the efficiency of the heat exchange. The particular design of the burner allows a low value of polluting emissions of both CO and NOx. The suitably studied geometry of the shell allows for external contact temperatures (even accidental) in line with the strictest regulations. The chamber made entirely of steel with a nickel-plating treatment makes the Ghibli Elite gas radiator extremely resistant, long-lasting and pleasing to the eye. Thanks to the use of high air flow rate fans with reduced number of revolutions, a comfortable air outlet temperature and good silence are obtained, without the danger of getting burned if the external covering mantle is accidentally touched.


    ELITE IN DIMENSIONS

    The dimensions are the most compact ever among the products on the market. The very low height allows easy installation under the window. SPLITTER With the splitter it is possible to solve the problems due to the positioning of the smoke outlet. The intake and exhaust ducts are separated and can cover distances of up to 3m each. Using the 90° bends it is possible to bring the ducts sideways. For each bend it will be necessary to reduce the total length of the 3 m air duct by 50 cm.

    Product Guarantee

    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 40.0 kg
    • marca: Accoroni
    • modello: Ghibli4Elite
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account