NB: THE BOILER IS BORN WITH METHANE, FOR THE TRANSFORMATION TO LPG, YOU MUST CONTACT THE AREA ASSISTANCE CENTER IN ADVANCE TO KNOW THE RELATED COSTS Chaffoteaux boiler INOA ULTRA 25 CF Open chamber low NOx cod. 3310639 - NEW ErP Technical Characteristics : Rated heat output max/min (Hi) Qn 25.8 / 11.0 kW Useful heating power max/min 23.2 / 9.8 kW Efficiency at nominal power 60/80 Hi 90.1% Efficiency at 30% of nominal power (47 Hi return) 89.9% Outlet temperature range min/max temp. 35-82°C Expansion tank capacity 8l Domestic hot water DHW comfort level (EN 13203) ** Max/min power in DHW mode 24.3 / 9.9 kW Specific flow rate in accordance with EN 625 at ΔT 30º C 11.8 l/min Hot water flow rate at ΔT 25º C 14.2 l/min Electrical data Supply voltage 230 V~ (50 Hz) Maximum absorbed power 52W Electrical protection degree IP X4D Dimensions HxWxD 745x400 x319 mm; 25 kgs INOA ULTRA 25 CF Inoa Ultra, equipped with multifunction LCD display. it contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance. Low NOx emissions: compliant with the Erp regulation of 09.26.2018 HEALTHCARE COMFORT Sanitary heat exchanger in stainless steel. Flow rate of 14.2 l/min with Δ=25°C. DHW circuit managed by two probes and a DHW flowmeter for better temperature stability based on the type of sampling. HEATING COMFORT High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Heating power of 25 kW. COMFORT OF USE AND INSTALLATION LCD display with display: history, self-diagnosis, operating temperature. Antifreeze function. Compact and perfectly adaptable to any type of home. Quick installation: predisposition for the use of the hydraulic bar (optional). Simplified maintenance: front access to all components. Prepared for integration with solar thermal systems. Prepared for on/off environmental regulation with and without wires. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€473,00
ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: AMMACCATURE AD ENTRAMBI I PANNELLI LATERALI IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). NB: LA CALDAIA NASCE A METANO, PER LA TRASFORMAZIONE A GPL BISOGNA CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA DI ZONA PER CONOSCERE I RELATIVI COSTI Caldaia Chaffoteaux INOA ULTRA 25 CF Camera Aperta low NOx cod. 3310639 - NEW ErP Caratteristiche Tecniche: Potenza termica nominale max/min (Hi) Qn 25,8 / 11,0 kW Potenza utile riscaldamento max/min 23,2 / 9,8 kW Rendimento a potenza nominale 60/80 Hi 90,1% Rendimento al 30% della potenza nominale (ritorno 47 Hi) 89,9% Intervallo temperatura di uscita min/max temp. 35-82 °C Capacità vaso d’espansione 8l Acqua calda Sanitaria Livello di comfort ACS (EN 13203) ** Potenza max/min in regime ACS 24,3 / 9,9 kW Portata specifica in conformità a EN 625 a ΔT 30º C 11,8 l/min Portata acqua calda a ΔT 25º C 14,2 l/min Dati elettrici Tensione di alimentazione 230 V~ (50 Hz) Potenza massima assorbita 52W Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400 x319 mm; 25 Kg INOA ULTRA 25 CF Inoa Ultra, dotata di display LCD multifunzione. racchiude nella sua semplicità tutte le caratteristiche tecniche necessarie per un funzionamento ottimale, garantendo prestazioni affidabili, pratiche e sicure. Basse emissioni di NOx: conforme alla normativa Erp del 26.09.2018 COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Portata da 14,2 l/min con Δ=25°C . Circuito sanitario gestito da due sonde e un flussimetro sanitario per una migliore stabilità della temperatura in base al tipo di prelievo. COMFORT NEL RISCALDAMENTO Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Potenza di riscaldamento di 25 kW. COMFORT D'USO E INSTALLAZIONE Display LCD con visualizzazione: storico, autodiagnosi, temperatura di funzionamento. Funzione antigelo. Compatta e perfettamente adattabile a qualunque tipologia di abitazione. Installazione rapida: predisposizione per l’utilizzo della barretta idraulica (opzionale). Manutenzione semplificata: accesso frontale a tutti i componenti. Predisposta per l’integrazione con sistemi solari termici. Predisposta per regolazione ambientale on/off con e senza fili. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto
€365,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA AMMACCATURE SU ENTRAMBI I LATI, UN DANNEGGIAMENTO SULLA PARTE POSTERIORE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) NB: LA CALDAIA NASCE A METANO, PER LA TRASFORMAZIONE A GPL BISOGNA CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA DI ZONA PER CONOSCERE I RELATIVI COSTI Caldaia Chaffoteaux INOA ULTRA 25 CF Camera Aperta low NOx cod. 3310639 - NEW ErP Caratteristiche Tecniche: Potenza termica nominale max/min (Hi) Qn 25,8 / 11,0 kW Potenza utile riscaldamento max/min 23,2 / 9,8 kW Rendimento a potenza nominale 60/80 Hi 90,1% Rendimento al 30% della potenza nominale (ritorno 47 Hi) 89,9% Intervallo temperatura di uscita min/max temp. 35-82 °C Capacità vaso d’espansione 8l Acqua calda Sanitaria Livello di comfort ACS (EN 13203) ** Potenza max/min in regime ACS 24,3 / 9,9 kW Portata specifica in conformità a EN 625 a ΔT 30º C 11,8 l/min Portata acqua calda a ΔT 25º C 14,2 l/min Dati elettrici Tensione di alimentazione 230 V~ (50 Hz) Potenza massima assorbita 52W Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400 x319 mm; 25 Kg INOA ULTRA 25 CF Inoa Ultra, dotata di display LCD multifunzione. racchiude nella sua semplicità tutte le caratteristiche tecniche necessarie per un funzionamento ottimale, garantendo prestazioni affidabili, pratiche e sicure. Basse emissioni di NOx: conforme alla normativa Erp del 26.09.2018 COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Portata da 14,2 l/min con Δ=25°C . Circuito sanitario gestito da due sonde e un flussimetro sanitario per una migliore stabilità della temperatura in base al tipo di prelievo. COMFORT NEL RISCALDAMENTO Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Potenza di riscaldamento di 25 kW. COMFORT D'USO E INSTALLAZIONE Display LCD con visualizzazione: storico, autodiagnosi, temperatura di funzionamento. Funzione antigelo. Compatta e perfettamente adattabile a qualunque tipologia di abitazione. Installazione rapida: predisposizione per l’utilizzo della barretta idraulica (opzionale). Manutenzione semplificata: accesso frontale a tutti i componenti. Predisposta per l’integrazione con sistemi solari termici. Predisposta per regolazione ambientale on/off con e senza fili. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto
€390,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE SUL PANNELLO ANTERIORE E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) Caratteristiche Tecniche Classe energetica in riscaldamento: A Classe energetica in sanitario: A Profilo di carico: XL Performance in riscaldamento: Portata termica (min./max): 3.7/22 kW Potenza utile (min./max.): 3.95/21.4 kW Rendimento termico utile: 98.0 % Rendimento al minimo (60/80°C): 97.5/87.8 % Potenza utile riscaldamento max/min (80°C-60°C): 21.4/3.4 kW Stelle di rendimento (dir. 92/42/EEC): **** Performance in sanitario: Portata termica (min./max): 3.7/28.9 kW Potenza termica (max/min) sanitario: 24.9/3.5 kW Circuito Riscaldamento: Pressione di precarica vaso di espansione: 1 bar Pressione massima di riscaldamento: 3 bar Capacità vaso di espansione: 8 L Temperatura di riscaldamento min/max (range alte temperature): 35 / 82 °C Temperatura di riscaldamento min/max (range basse temperature): 20 / 45 °C Circuito Sanitario: Temperatura sanitario min/max: 36 / 90 °C Portata specifica in sanitario (10 min. con ∆T=30°C: 12,1 l/min Quantità istantanea di acqua calda ∆T=25°C: 15,5 l/min Quantità istantanea di acqua calda ∆T=35°C: 10.4 l/min Stelle comfort sanitario (EN13203): *** Prelievo minimo di acqua calda: 2 l/min Pressione acqua sanitaria max/min: 7,0 / 0,2 bar Dati Elettrici: Indice di protezione IPX5D Classe 6 NOx Indice di efficienza energetica del circolatore: EEI ≤ 0,23 Temperatura ambiente minima di utilizzo: >0°C Potenza elettrica assorbita totale: 67 W Alimentazione: METANO (G20/G30) Dimensioni: (HxLxP): 745x400x385 mm; Peso: 29,7 kg Pigma è la nuova Caldaia di CHAFFOTEAUX, Che fa parte della Gamma Advance, risultando essere leader di categoria dal design completamente rinnovato, utilizzando l’innovativo scambiatore SpinTech, controllo elettronico della combustione, all'integrata connettività Chaffolink e all’Expert Control e sonda esterna di serie, garantendo altissime prestazioni a consumi estremamente ridotti. Installabile in luoghi parzialmente protetti. Caratteristiche SpinTech: Scambiatore che lavora con monospirale in acciaio Inox Nuovo scambiatore primario in acciaio inox a spira unica Sezioni di passaggio aumentate del 142% rispetto alla versione precedente 1 m in più di prevalenza Rendimento stagionale al 94% Classe A+ grazie agli accessori di termoregolazione di serie Prestazioni certificate dal Gruppo TÜV RHEINLAND. Regala Comfort: Rapporto di modulazione 1:7 Silenziatore interno ottimizzato Funzione SRA Trasformazione gas con kit incluso di serie Predisposta per la connettività Chaffolink Vantaggi: Installazione in luoghi parzialmente protetti Scarichi fumi 80, 60, 50 mm Connessioni elettriche intuitive Fino al 20% di risparmio energetico in combinazione con Expert Control e la funzione SRA Fino al 30% di risparmio energetico combinando Expert Control, la funzione SRA, la sonda esterna e il pavimento radiante. Emissioni inquinanti ridotte, Classe NOx 6.
€725,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA UN'AMMACCATURA AL PANNELLO FRONTALE, AMMACCATURA LATERALE, ANGOLO GRAFFIATO, LA BASE IN PLASTICA PRESENTA SEGNI DI RIPARAZIONI E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) Caratteristiche Tecniche Classe energetica in riscaldamento: A Classe energetica in sanitario: A Profilo di carico: XL Performance in riscaldamento: Portata termica (min./max): 3.7/22 kW Potenza utile (min./max.): 3.95/21.4 kW Rendimento termico utile: 98.0 % Rendimento al minimo (60/80°C): 97.5/87.8 % Potenza utile riscaldamento max/min (80°C-60°C): 21.4/3.4 kW Stelle di rendimento (dir. 92/42/EEC): **** Performance in sanitario: Portata termica (min./max): 3.7/28.9 kW Potenza termica (max/min) sanitario: 24.9/3.5 kW Circuito Riscaldamento: Pressione di precarica vaso di espansione: 1 bar Pressione massima di riscaldamento: 3 bar Capacità vaso di espansione: 8 L Temperatura di riscaldamento min/max (range alte temperature): 35 / 82 °C Temperatura di riscaldamento min/max (range basse temperature): 20 / 45 °C Circuito Sanitario: Temperatura sanitario min/max: 36 / 90 °C Portata specifica in sanitario (10 min. con ∆T=30°C: 12,1 l/min Quantità istantanea di acqua calda ∆T=25°C: 15,5 l/min Quantità istantanea di acqua calda ∆T=35°C: 10.4 l/min Stelle comfort sanitario (EN13203): *** Prelievo minimo di acqua calda: 2 l/min Pressione acqua sanitaria max/min: 7,0 / 0,2 bar Dati Elettrici: Indice di protezione IPX5D Classe 6 NOx Indice di efficienza energetica del circolatore: EEI ≤ 0,23 Temperatura ambiente minima di utilizzo: >0°C Potenza elettrica assorbita totale: 67 W Alimentazione: METANO (G20/G30) Dimensioni: (HxLxP): 745x400x385 mm; Peso: 29,7 kg Pigma è la nuova Caldaia di CHAFFOTEAUX, Che fa parte della Gamma Advance, risultando essere leader di categoria dal design completamente rinnovato, utilizzando l’innovativo scambiatore SpinTech, controllo elettronico della combustione, all'integrata connettività Chaffolink e all’Expert Control e sonda esterna di serie, garantendo altissime prestazioni a consumi estremamente ridotti. Installabile in luoghi parzialmente protetti. Caratteristiche SpinTech: Scambiatore che lavora con monospirale in acciaio Inox Nuovo scambiatore primario in acciaio inox a spira unica Sezioni di passaggio aumentate del 142% rispetto alla versione precedente 1 m in più di prevalenza Rendimento stagionale al 94% Classe A+ grazie agli accessori di termoregolazione di serie Prestazioni certificate dal Gruppo TÜV RHEINLAND. Regala Comfort: Rapporto di modulazione 1:7 Silenziatore interno ottimizzato Funzione SRA Trasformazione gas con kit incluso di serie Predisposta per la connettività Chaffolink Vantaggi: Installazione in luoghi parzialmente protetti Scarichi fumi 80, 60, 50 mm Connessioni elettriche intuitive Fino al 20% di risparmio energetico in combinazione con Expert Control e la funzione SRA Fino al 30% di risparmio energetico combinando Expert Control, la funzione SRA, la sonda esterna e il pavimento radiante. Emissioni inquinanti ridotte, Classe NOx 6.
€750,00
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA BOZZATURE LATERALI E GRAFFI SULLA PARTE INFERIORE, L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE) NB: LA CALDAIA NASCE A METANO, PER LA TRASFORMAZIONE A GPL BISOGNA CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA DI ZONA PER CONOSCERE I RELATIVI COSTI Caldaia Chaffoteaux INOA ULTRA 25 CF Camera Aperta low NOx cod. 3310639 - NEW ErP Caratteristiche Tecniche: Potenza termica nominale max/min (Hi) Qn 25,8 / 11,0 kW Potenza utile riscaldamento max/min 23,2 / 9,8 kW Rendimento a potenza nominale 60/80 Hi 90,1% Rendimento al 30% della potenza nominale (ritorno 47 Hi) 89,9% Intervallo temperatura di uscita min/max temp. 35-82 °C Capacità vaso d’espansione 8l Acqua calda Sanitaria Livello di comfort ACS (EN 13203) ** Potenza max/min in regime ACS 24,3 / 9,9 kW Portata specifica in conformità a EN 625 a ΔT 30º C 11,8 l/min Portata acqua calda a ΔT 25º C 14,2 l/min Dati elettrici Tensione di alimentazione 230 V~ (50 Hz) Potenza massima assorbita 52W Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400 x319 mm; 25 Kg INOA ULTRA 25 CF Inoa Ultra, dotata di display LCD multifunzione. racchiude nella sua semplicità tutte le caratteristiche tecniche necessarie per un funzionamento ottimale, garantendo prestazioni affidabili, pratiche e sicure. Basse emissioni di NOx: conforme alla normativa Erp del 26.09.2018 COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Portata da 14,2 l/min con Δ=25°C . Circuito sanitario gestito da due sonde e un flussimetro sanitario per una migliore stabilità della temperatura in base al tipo di prelievo. COMFORT NEL RISCALDAMENTO Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Potenza di riscaldamento di 25 kW. COMFORT D'USO E INSTALLAZIONE Display LCD con visualizzazione: storico, autodiagnosi, temperatura di funzionamento. Funzione antigelo. Compatta e perfettamente adattabile a qualunque tipologia di abitazione. Installazione rapida: predisposizione per l’utilizzo della barretta idraulica (opzionale). Manutenzione semplificata: accesso frontale a tutti i componenti. Predisposta per l’integrazione con sistemi solari termici. Predisposta per regolazione ambientale on/off con e senza fili. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto
€395,00
NB: PRODOTTO NUOVO E FUNZIONANTE, PRESENTA UN' AMMACCATURA LUNGO IL BORDO DESTRO CAUSATA DAL TRASPORTO COME DA FOTO. IMBALLO DANNEGGIATO Caratteristiche Tecniche Classe energetica in riscaldamento: A Classe energetica in sanitario: A Profilo di carico: XL Performance in riscaldamento: Portata termica (min./max): 4.3/31.1 kW Potenza utile (min./max.): 3.9/30.0 kW Rendimento termico utile: 98.0 % Rendimento al minimo (60/80°C): 91,1 / 82 % Potenza utile riscaldamento max/min (80°C-60°C): 27.4/3.9 kW Stelle di rendimento (dir. 92/42/EEC): **** Performance in sanitario: Portata termica (min./max): 4.3/33.3 kW Potenza termica (max/min) sanitario: 24.9/2.4 kW Circuito Riscaldamento: Pressione di precarica vaso di espansione: 1 bar Pressione massima di riscaldamento: 3 bar Capacità vaso di espansione: 8 L Temperatura di riscaldamento min/max (range alte temperature): 35 / 82 °C Temperatura di riscaldamento min/max (range basse temperature): 20 / 45 °C Circuito Sanitario: Temperatura sanitario min/max: 36 / 90 °C Portata specifica in sanitario (10 min. con ∆T=30°C: 14.5 l/min Quantità istantanea di acqua calda ∆T=25°C: 17.4 l/min Quantità istantanea di acqua calda ∆T=35°C: 12.5 l/min Stelle comfort sanitario (EN13203): *** Prelievo minimo di acqua calda: 2 l/min Pressione acqua sanitaria max/min: 7,0 / 0,2 bar Dati Elettrici: Indice di protezione IPX5D Classe 6 NOx Indice di efficienza energetica del circolatore: EEI ≤ 0,23 Temperatura ambiente minima di utilizzo: >0°C Potenza elettrica assorbita totale: 80 W Alimentazione: METANO (G20/G30) Dimensioni: (HxLxP): 745x400x385 mm; Peso: 29,7 kg Pigma è la nuova Caldaia di CHAFFOTEAUX, Che fa parte della Gamma Advance, risultando essere leader di categoria dal design completamente rinnovato, utilizzando l’innovativo scambiatore SpinTech, controllo elettronico della combustione, all'integrata connettività Chaffolink e all’Expert Control e sonda esterna di serie, garantendo altissime prestazioni a consumi estremamente ridotti. Installabile in luoghi parzialmente protetti. Caratteristiche SpinTech: Scambiatore che lavora con monospirale in acciaio Inox Nuovo scambiatore primario in acciaio inox a spira unica Sezioni di passaggio aumentate del 142% rispetto alla versione precedente 1 m in più di prevalenza Rendimento stagionale al 94% Classe A+ grazie agli accessori di termoregolazione di serie Prestazioni certificate dal Gruppo TÜV RHEINLAND. Regala Comfort: Rapporto di modulazione 1:7 Silenziatore interno ottimizzato Funzione SRA Trasformazione gas con kit incluso di serie Predisposta per la connettività Chaffolink Vantaggi: Installazione in luoghi parzialmente protetti Scarichi fumi 80, 60, 50 mm Connessioni elettriche intuitive Fino al 20% di risparmio energetico in combinazione con Expert Control e la funzione SRA Fino al 30% di risparmio energetico combinando Expert Control, la funzione SRA, la sonda esterna e il pavimento radiante. Emissioni inquinanti ridotte, Classe NOx 6.
€880,00
Technical features Product code: 3310616 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating nominal heat input max/min (Hi): 28/3.0 kW DHW nominal heat input max/min (Hi): 30.0/3.5 kW Performance Stars **** Expansion tank capacity 8 l Instantaneous quantity of hot water (∆T=25 K): l/min 17.2 Domestic water pressure max/min bar 7.0/0.2 Electrical characteristics Supply voltage/frequency: V/Hz 230/50 IP X5D degree of protection Dimensions Weight: 32.3kg General characteristics AIM ADVANCE Mira Advance is the condensing boiler born for the future with a powerful soul, Spin Tech, the new exchanger with a completely renewed design that offers high performance, to improve domestic comfort and adapt to every need. Maximum Performance: New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Maximum Comfort Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Ready for Chaffolink connectivity. Ease of Installation Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015 , the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.101,00
ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE SIDE, THE DISPLAY IS SCRATCHED AND A SLIGHT CRACK (SEE PHOTO NEXT TO THE MAIN IMAGE) Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 4.3/31.1 kW Useful power (min./max.): 3.9/30.0 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 91.1 / 82% Max/min useful heating power (80°C-60°C): 27.4/3.9 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 4.3/33.3 kW DHW thermal power (max/min): 24.9/2.4 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion tank capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare Circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 14.5 l/min Instantaneous quantity of hot water ∆T=25°C: 17.4 l/min Instantaneous quantity of hot water ∆T=35°C: 12.5 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 80 W Power supply: METHANE (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.
€765,00
Overview CHAFFOTEAUX ALIXIA S 24 CF EU LPG METHANE BOILER - NEW ErP 2016 Cod. 3310492: Alixia S eu, with multifunction LCD display, contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance. Technical specifications Product code: 3310492 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiencyClass B Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat output in heatingÿmax/min:ÿ25.8/ 11.2ÿkW Useful heating power max/min:ÿ23.7/ 10.1ÿkW Nominal heat output max/min (sanitary) PCI:ÿ27/ 11.0 kW Max/min power in DHW mode:ÿ24.8/ 9.9 kW Efficiency at nominal heat input: 91.9% Efficiency 30% of nominal heat input:ÿ91.2% Outlet temperature range min/max temp.:ÿ35-85øC Sanitary comfort performance starsEN13203: *** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Port. specific in healthcare (10 min. with T= 30øC): 12.2 l/min Hot water flow rate at T 25§ C: 14.2 l/min Electrical protection degrees: IP X4D Dimensions hxwxd: mmÿ745x400 x307ÿ; 30kg ÿMETHANEÿorÿLPG power supply Propan methane conversion kit supplied Features list Alixia S EU Alixia S eu, with multifunction LCD display, contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance Sanitary comforts Sanitary heat exchanger in stainless steelÿ 11.3 l/min sanitary flow according to standard EN625. Sanitary circuit managed by two probes and a sanitary flowmeter for better temperature stability based on the type of sampling. Heating comfort 3 stars of combustion efficiency according to the EN92/42 standard. Heating power of 24 kW. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Convenience of installation use Compact and perfectly adaptable to any type of home. Quick installation: predisposition for the use of the hydraulic bar (optional). Simplified maintenance: frontal access to all components. Prepared for integration with solar thermal systems (standard solar probe). Prepared for on/off environmental regulation with and without wires. LCD display with display: history, self-diagnosis, operating temperature. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.
€375,00
Overview CHAFFOTEAUX URBIA GREEN Ebus2 35 EU CONDENSING BOILER Cod. 3310409 COMPLETE WITH FUME EXHAUST KIT -NEW ErP 2015: Wall mounted condensing boilers with 4 liter mini-accumulator. Technical specifications Product code: 3310409 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat output max/min (Hi) Qn:ÿ31/3,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ30.3/3.4ÿkW Useful heating power50§ C/ 30§ C max/minÿ33/3,6ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ34.5/ 7ÿkW Efficiency at nominal heat input:ÿ97.7% Efficiency 30% of nominal heat input:ÿ108.7% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Port. specific in healthcare (10 min. with T= 30øC): 16.5 l/min Hot water flow rate at T 25§ C: 19.3 l/min Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ745 x 440 x 445ÿ; 46kg METHANE power supply or Features list URBIA GREEN Ebus2 EU Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users. Sanitary comfort Mini-accumulintegrated in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with T = 25§C. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low. DHW programmer to control the tank heating time slots Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode. Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. Modulation wide range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Pressure sensor of the heating circuit with visualization on LCD display. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. Filling taps integrated in the boiler. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.243,00
Technical features Product code: 3310501 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat output max/min heating (Hi) Qn 22/2.5 kW Useful heating power 80º C/ 60º C max/min 21.5/2.4 kW Efficiency at 30% of nominal power (47 Hi return) 97.8% Maximum heating pressure/safety valve setting 3/3.0 bar Capacity of the expansion tank 8 l Performance Stars **** Sanitary max/min rated thermal power (60/80ºC) PCI 25/ 5.5 kW Sanitary specific flow rate in compliance with EN 625 at Δt 30ºC 13.2 l/m Hot water flow rate at ∆T 25º C l/m 14.6 NOx class 5 Electrical protection degree IP X5D Dimensions: HxWxD 745 x 440 x 375; 42 kgs General characteristics URBIA GREEN LINK EU Reliable, designed to guarantee the best performance with minimum consumption and easy to manage, even remotely with your smartphone: Urbia Green Link by Chaffoteaux is the latest novelty in the field of efficient heating. Not a simple condensing boiler but a real advanced package that combines the efficiency of the new Urbia Green EU with the connectivity kit that allows the control and management of the entire system. A solution that reduces consumption by up to 40% * and obtains the advantageous tax deductions of 65% , envisaged for the purchase and installation costs of home automation systems and therefore concerning the cost of the boiler but also that of accessories and labour. In this way, just over two years are enough to recover the investment linked to the new heating system. The brain of the Chaffoteaux system is represented by the Expert Control Link chronothermostat, powered directly by the boiler and connectable to the Wi-Fi network to activate the assistance and remote control functions. It is thus possible to manage the switching on and off and the regulation of the main functions with the dedicated Chaffolink App but also to activate a remote assistance service for scheduled maintenance, remote repairs and real-time notification of any problems. In the event of a malfunction, the technician who will work on the boiler will always know the real problem in advance and the time needed to solve it, thus avoiding unnecessary site visits. The monitoring of daily, weekly and monthly consumption - from Expert Control or directly from the App - also allows you to check how much energy is used for heating and how much for domestic hot water, thus optimizing boiler management. Among the pluses of Chaffoteaux technology: the 4-litre micro-accumulator , which makes hot water immediately available, a constant report of energy consumption and the SRA function for automatic regulation of boiler parameters based on environmental conditions. Chaffoteaux Urbia Green Link is available in versions with 25 and 35 kW condensing boiler. > HEALTH COMFORT Integrated mini-accumulator in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with ΔT = 25ºC. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very limited. DHW programmer to control the tank heating time slots Eco-Delta System: DHW filling system with 4-litre reserve to further improve the comfort of DHW production and new ecological functions which allow energy savings in DHW mode. > MAXIMUM COMFORT IN HEATING Through the free APP and the connectivity service you can constantly monitor the room temperature and manage the boiler parameters. Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency according to EN 92/42 standard. Wide modulation range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Heating circuit pressure sensor with visualization on LCD display. SRA function, automatic boiler regulation system according to heating requirements. Differentiated climatic thermoregulation of 2 circuits, according to the ambient and/or external temperature. Arrangement for integration into a heating system via the new Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. > COMFORT OF USE AND INSTALLATION Standard Expert Control : intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier starting: automatic purge function and directly accessible combustion regulation. > CONSCIOUS CONSUMPTION, ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Weekly, monthly and yearly analysis on your smartphone . Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information that allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.082,00
You have seen 12 out of 73 products
