ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED ASSISTANCE SERVICE IN ADVANCE Junkers Bosch CONDENS 2300 W GC2300W 24/30 C 29 kW condensing boiler With Methane Fume Exhaust Kit - NEW ERP Technical features Heating efficiency class A Sanitary efficiency class A XL load profile Nominal thermal power in DHW kW 25.2 DHW nominal heat input kW 29.4 Performance stars (Dir. 92/42CEE) ★★★★ NOx class 6 Nominal flow rate in heating (ΔT=30K) l/h 1033 Expansion vessel capacity l 6 Domestic hot water production (ΔT = 30K) l/min 14.0 kW Power supply V/Hz 230/50 Dimensions (L x W x H) mm 300 x 400 x 713 Power supply: CNG or LPG (adjustable) Condensed 2300 W The energy efficiency of condensing and the elegance of a modern design come together in Condens 2300 W, the Bosch gas-fired wall-mounted condensing boiler for heating and domestic hot water production. The many advantages of this boiler make it the ideal choice for renovation projects. Simply easy to install Condens 2300 W is designed to find space anywhere: its small size means it can be installed in any domestic environment with the utmost simplicity and make it an ideal solution for modernization projects. Installing Condens 2300 W, even in the event of renovation, is very simple: its compactness makes it extremely versatile and, as it adapts to multiple geometries, it does not require moving the smoke outlet. Various accessories are also available to support installation. Maintenance is also simplified, thanks to the possibility of removing the side panels and easily accessing the components. Modern and functional, both inside and out Condens 2300 W combines the use of top quality materials, designed to last over time, with a sophisticated and functional design, which highlights the modernity of this boiler both in front of and behind the casing. The components are top quality, starting with the silicon aluminum heat exchanger, a guarantee of sturdiness and reliability over time. Simply efficient in all circumstances Condens 2300 W is synonymous with efficiency thanks to the modulating burner with a 1:10 range which automatically adapts to the heat requirement of the moment, achieving very high seasonal energy efficiency for space heating, with values up to 94%. Again thanks to the wide modulation, this boiler also supplies a lot of hot water with a constant temperature. Furthermore, Condens 2300 W, if combined with modulating thermoregulation with climatic function, falls within energy class A+ and allows access to tax incentives of up to 65%. Finally, compatibility with the new EasyControl smart thermostat allows you to conveniently control the system remotely via smartphone, thanks to the special App*. The main advantages at a glance ▶ Simplified installation and maintenance operations ▶ High efficiency guaranteed by the wide modulation range (1:10) ▶ Small size: it adapts to any domestic environment and represents the ideal solution for replacement interventions ▶ Optimum insulation to guarantee very quiet operation ▶ Accessible and intuitive electronics ▶ New rounded design and intuitive controls ▶ 3-star sanitary comfort, the maximum obtainable according to the EN13203-1/2 standard ▶ Compatible with Bosch EasyControl thermostat, remote control via special App Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.139,00
ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). NB: LA CURVA E IL TUBO PER IL KIT COASSIALE VANNO ACQUISTATI A PARTE Caldaia Rinnai a Condensazione Momiji 29 kW Completa di Kit Scarico Fumi con Cronotermostato Wi-Fi Intergrato GPL Low NOx REB-KAI2529FF Codice RREB-KAI2529FF Classe energetica riscaldamento A Profilo di carico XL Potenza termica nominale kW 24 Rendimento EN677 su P.C.I. (80-60°C) % 96,1 Modulazione potenza nominale (80-60°C) Risc. kW 8,2 - 23,8 Classe NOx 6 Potenza elettrica massima assorbita in riscaldamento W 98 Potenza elettrica in stand by W < 3 Tensione di alimentazione V/Hz 230 / 50 Grado di protezione IPX5D Erogazione acqua calda sanitaria (ΔT=35°C) l/min 11.6 Erogazione acqua calda sanitaria (ΔT=25°C) l/min 16.3 Dimensioni (A x L x P) (mm)660x440x285 MOMIJI Il caldo abbraccio dell’autunnoMOMIJI sono gli aceri rossi tipici dell’Oriente, le cui foglie colorano di rosso l’autunno, una stagione che i Giapponesi vivono come «di conforto». Grazie al clima mite e alle temperature che tornano ad essere accoglienti (non più il caldo torrido dell’estate, non ancora il clima gelido dell’inverno), prendersi del tempo è ancora più piacevole. Godere della propria casa, così come del foliage, regala benessere. Momiji interpreta al meglio il connubio tra gli impianti tradizionali e la tecnologia della condensazione. Infatti, pur integrandosi perfettamente con differenti sistemi, è progettata per ottimizzare la tecnologia della condensazione su impianti a radiatori, rispondendo in modo concreto alle esigenze di risparmio ed eco-sostenibilità di questa tipologia di riscaldamento, estremamente diffusa ma spesso impossibilitata a sfruttare a pieno i vantaggi della condensazione. Il riscaldamento è smartMomiji offre il cronotermostato Wi-Fi di serie (installabile anche in un locale diverso da quello del generatore) per gestire e controllare la caldaia sempre e dovunque, in completa libertà. Report di consumo, programmazione settimanale, modifica delle impostazioni e gestione di più caldaie (come la propria e quella dei genitori anziani, o della casa in montagna) dalla stessa APP “My Rinnai”, disponibile per smartphone Android e iOS. Tutto questo e molto altro per offrirti una gestione totally smart.La sonda climatica integrata è uno standard dei generatori termici Rinnai: il posizionamento interno consente, a te che la utilizzi e a te che la installi, di evitare opere murarie e collegamenti elettrici. Grazie a questo sensore, puoi dimenticarti di regolare la temperatura di casa e lasciare che il generatore pensi a tutto, adeguando in modo intelligente il suo funzionamento a seconda del meteo, più o meno freddo. Così mentre la caldaia opera in regolazione climatica a temperatura scorrevole, tu puoi godere di un equilibrio perfetto tra comfort e risparmio, e nessun pensiero.Momiji Il comfort non è mai stato così sempliceFacile, ovunqueAl pari degli scaldacqua Rinnai Infinity, anche le caldaie Momiji sono studiate appositamente per facilitare il lavoro dell’installatore. L’apparecchio è piccolo, leggero e compatto. È pronto all’uso e non necessita di essere configurato. Il sistema fumario è sdoppiato Ø80/80 e, grazie all’elevata prevalenza del ventilatore è possibile arrivare fino a 30 metri lineari equivalenti.Scambio termicoMomiji presenta uno scambio termico in rame, ad ampia sezione di passaggio: questo facilita l’integrazione su impianti esistenti a radiatori e semplifica le operazioni di pulizia. Questa gamma di caldaie è la soluzione perfetta per impianti tradizionali spesso imperfetti.Installabile anche all’esternoMomiji è certificata IPX5D e dispone del kit antigelo di serie fino a -20°C. Grazie a queste caratteristiche può essere installata anche all’esterno senza necessità di protezioni aggiuntiveNeutralizzatore di condensa integratoLa serie Momiji presenta il sifone di condensa integrato all’interno del generatore, già addizionato di granulato e subito pronto all’uso. Ciò ti consente di semplificare l’installazione, sempre, anche in caso di sostituzione di un generatore tradizionale ad alta temperatura. Il neutralizzatore integrato, infatti, permette di eliminare l’acidità della condensa (acqua a pH acido prodotta dal normale funzionamento del generatore termico, corrosiva per le tubature) senza dover affrontare i costi di acquisto e manutenzione di un accessorio esterno che assolva a questa funzione, altrimenti indispensabile. Garanzia Prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€1.185,00 - €1.285,00
Riello condensing boiler Family 35 KIS Low NOx complete with methane or LPG fume exhaust kit class A - NEW Energy class in heating A Energy class in sanitary A Load profile XXL Heating Nominal heat input kW 30.0 Nominal thermal power (80°-60°) kW 29.2 Expansion vessel L 10 Sanitary Nominal heat input kW 34.6 Nominal thermal power** kW 36.3 Maximum pressure bar 8 Hot water production with T+25 °C l/min 20.8 NOx class 6 Dimensions Dimensions (H***xLxP) mm 822x470x350; 39 kgs Methane or LPG power supply: the boiler is self-adapting without the need for conversion kits Riello presents the New Family New stainless steel heat exchanger Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. Riello has also optimized the DHW exchanger by adopting the most advanced fluid-thermodynamic analysis and simulation techniques to obtain the best performance and maximum comfort for the user in terms of waiting times and temperature stability during sampling, compared to a boiler traditional MAXIMUM POSSIBLE LOAD PROFILE IN RELATION TO THE TYPE AND POWER OF THE GENERATOR, UP TO XXL IN THE CASE OF 35 KW FAMILY. SANITARY ENERGY EFFICIENCY CLASS A, THE MAXIMUM VALUE CURRENTLY PROVIDED BY EU REGULATION 811/2013 FOR COMBINED GENERATORS (TRADITIONAL B OILER CLASS B). REDUCTION OF GAS CONSUMPTION COMPARED WITH A TRA ADTIONAL BOILER BY APPROXIMATELY 10%, ACCORDING TO EN13203-2. ALMOST NULL WAITING TIME FOR HOT WATER (< 1 SECOND) WITH DOMESTIC HOT WATER PRE-HEATING FUNCTION ACTIVE (TRADITIONAL BOILER ABOUT 40 SECONDS). Emissions always under control The new Family is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionisation electrode. Thanks to the ACC, the Family is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Family also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the air/gas mixture to always keep it within the optimal parameters. The ACC system also simplifies installation. In the ignition phase, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The Family display is equipped with the new "Color Bar" which informs the user at a glance on the operating status of the boiler. In the event of anomalies, it is possible to immediately understand if a problem is critical and whether to request the intervention of technical assistance. GREEN Regular operation. The system is satisfying domestic hot water/heating requests or carrying out other automatic operations. A scrolling text at the bottom describes the function active at that moment. RED Presence of blocking anomalies that require an intervention by the Technical Assistance. An error triangle on the display gives access to the details of the anomaly. YELLOW Presence of anomalies that can potentially be solved by the user which allow even partial operation of the product. An error triangle on the display gives access to the details of the anomaly. GRAY The system is ready to serve any requests. No operation in progress and anomaly detected. RiCloud - Comfort at your fingertips The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Many needs, one solution INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment . OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the standard antifreeze function down to -0 °C , without additional heaters. BUILT- IN Inside a built-in box or wall unit, thanks to its compact dimensions (25 kW model). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.473,00
Beretta CIAO AT 29 csi LOW NoX condensing boiler Complete with smoke kit Cod. 20151830 Technical specifications according to ErP directives Model: HELLO AT LOW NOx Sanitary energy efficiency class: A Energy efficiency class in heating: B Load profile: XL Product code 20151830 Natural gas supply Technical features: Indoor/Outdoor installation Nominal heat input 28 kW Nominal thermal power 26.8 kW Nominal thermal power at partial load (30%) 8.5 kW Useful efficiency at nominal power 86.3% n4 New version NOx < 56 mg/kWh IPX5D electrical protection degree Dimensions Dimensions h/w/d (mm): 780/452/336 NB: THE BOILER IS SUPPLIED WITH METHANE, IT CAN BE CONVERTED TO LPG THROUGH THE AREA ASSISTANCE CENTER HELLO AT new LOW NOx model Hi AT, ideal for replacement in systems with radiators Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. New burner with low NOx emissions Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. The management The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Compatible with BeSMART The BeSMART WiFi Comfort Control Panel, optional compatible with Ciao AT, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Outdoor installation Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€834,00
BERETTA MYNUTE SINTHESI 29 CSI CONDENSING BOILER COMPLETE WITH CNG FUME EXHAUST KIT NEW ErP Characteristics: Mynute Sinthesi presents itself in a renewed guise, keeping unchanged all the characteristics that they have always distinguished it. Mynute Sinthesi is the innovative condensing boiler studied specially by Beretta for traditional systems ad high temperature (radiators and radiators). The boiler is equipped with a fume heat recovery unit and combustion in sealed chamber; this allows for obtain very high performance in terms of yield and therefore significant savings energetic. Mynute Sinthesi therefore represents the ideal solution both in the first installation and in the replacement. MYNUTE SINTHESI 29 CIS Class B heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile - XL Seasonal heating efficiency % 86 CHARACTERISTICS Nominal heat input kW 29 Nominal thermal power (80 - 60 °C) kW28.30 Reduced thermal power (80 - 60 °C) kW 14.28 Reduced heat input kW 15 Electric power Watt 114 Electrical protection degree IP X5D X5D Useful efficiency at Pn max ((80 - 60 °C) % 97.6 Useful efficiency at 30% of Pn (47 °C return) % 95.2 HEATING EXERCISE Maximum pressure and temperatures bar/°C 3 / 90 Heating temperature selection range °C 40 / 80 Pump: pump head available for the system mbar 266 at a flow rate of 1000 litres/h Expansion vessel capacity 9 litres HEALTHCARE EXERCISE Maximum pressure 6 bar Minimum pressure bar 0.15 Quantity of hot water with ∆t=25°C litres/min 16.6 Minimum domestic water flow rate litres/mini 2 DHW temperature selection range °C 37 - 60 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” COAXIAL FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 60 - 100 Maximum length 4.5 m Loss for inserting a 90° / 45° bend m 1.6 / 1.3 Diameter mm 80 - 125 Maximum length 11m 9 Loss for inserting a 90° / 45° bend m 1.5/1 SEPARATE FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 80 + 80 80 + 80 Maximum length m 12 + 12 Loss for inserting a 90° / 45° bend m 1.5/1 DIMENSIONS, WEIGHT, GAS Boiler size (HxLxP) mm 780x452x338 Weight kg 44 Gas versions available (*) MTN (*) For gas conversion, contact authorized Beretta Technical Assistance Centres General characteristics Mynute Sinthesi - ErP Mynute Sinthesi by Beretta is a wall-mounted condensing boiler for high temperature single-family systems. Continuous electronic modulation of the gas antifreeze device as standard (up to 0°C). Environmental Self-Regulation System (SARA). Mynute Sinthesi keeps all the peculiarities of the Mynute range unchanged but evolves towards new needs. The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this makes it possible to obtain very high performance in terms of efficiency and therefore significant energy savings. Mynute Sinthesi therefore represents the ideal solution both in the first installation and in the replacement. Product Guarantee The warranty on this item is 24 months from the date of purchase.
€1.120,00
ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Beretta CIAO AT 29 csi LOW NoX condensing boiler Complete with smoke kit Cod. 20151830 Technical specifications according to ErP directives Model: HELLO AT LOW NOx Sanitary energy efficiency class: A Energy efficiency class in heating: B Load profile: XL Product code 20151830 LPG supply Technical features: Indoor/Outdoor installation Nominal heat input 28 kW Nominal thermal power 26.8 kW Nominal thermal power at partial load (30%) 8.5 kW Useful efficiency at nominal power 86.3% n4 New version NOx < 56 mg/kWh IPX5D electrical protection degree Dimensions Dimensions h/w/d (mm): 780/452/336 HELLO AT new LOW NOx model Hi AT, ideal for replacement in systems with radiators Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. New burner with low NOx emissions Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. The management The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Compatible with BeSMART The BeSMART WiFi Comfort Control Panel, optional compatible with Ciao AT, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Outdoor installation Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€834,00
START AR 29 KIS WALL-MOUNTED CONDENSING BOILER FOR HEATING AND HOT WATER FUME KIT INCLUDED LPG KASKO INSURANCE SHIPPING ON PLATFORM ErP technical data Seasonal space heating energy efficiency class B Water heating energy efficiency class A Declared load profile XL Heating technical data Nominal heat input (Hi) kW 28 Nominal heat output (80-60°C) 26.82 Warm-up exercise Maximum pressure bar 3 Maximum temperature 90 °C Membrane expansion vessel l 8 Sanitary technical data Nominal heat input (Hi) kW 28.00 Profit return 30% (30th return) % 100.6 Supply voltage V - Hz 230-50 IP X5D degree of protection NOx class 6 Dimensions WxDxH 400x332x780 mm; 37 kgs START AR Start AR is the condensing boiler specifically designed to operate with high temperatures and therefore with radiator systems. It is available in power ratings of 25 and 29 kW with low NOx emissions <56 mg/kWh. – Cooled burner – Low consumption circulator (IEE≤0.20) – Climatic regulation managed directly by the boiler control unit – Assembly crossbar, power supply cable supplied – Hydraulic connections available as an accessory – Degree of electrical protection IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€738,00
CHAFFOTEAUX INOA GREEN Ebus2 29 EU CONDENSING BOILER Product code: 3310478 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating/DHW max/min (Hi): 29/6 kW Max/min heating thermal power (80°C-60°C): 28.4/5.8 kW DHW max/min thermal power: 28.4/5.8 kW Efficiency at nominal heat input: 97.7% Efficiency at 30% of the nominal heat input: 108% Energy efficiency stars: (dir 92/42/EEC) **** Expansion vessel capacity: 8 l Sanitary comfort stars (EN13203): ** Port. specific in healthcare (10 min. with ΔT= 30°C): 13.2 l/min Hot water flow rate at ∆T 25º C: 16.3 l/min Electrical system protection degree: IPX5D Extremely compact dimensions hxwxd: mm 745x400x315 ; 27kg LPG power supply INOA GREEN Ebus2 EU The new compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 2
€776,00
RIELLO START IN CONDENS 29 KIS METHANE CONDENSING COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 It can be installed flush-mounted using the special built-in unit Power supply: METHANE General characteristics START IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Recessed Start IN Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can be installed flush-mounted using the special kit. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Remote control panel in combination with the external probe (optional) Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.179,00
WALL-MOUNTED CONDENSING BOILER COD.20151818 RIELLO START AR 29 KIS LOW NOX FOR HEATING AND HOT WATER FUME KIT INCLUDED METHANE KASKO INSURANCE SHIPPING ON PLATFORM ErP technical data Seasonal space heating energy efficiency class B Water heating energy efficiency class A Declared load profile XL Heating technical data Nominal heat input (Hi) kW 28 Nominal heat output (80-60°C) 26.82 Warm-up exercise Maximum pressure bar 3 Maximum temperature 90 °C Membrane expansion vessel l 8 Sanitary technical data Nominal heat input (Hi) kW 28.00 Profit return 30% (30th return) % 100.6 Supply voltage V - Hz 230-50 IP X5D degree of protection NOx class 6 Dimensions WxDxH 400x332x780 mm; 37 kgs START AR Start AR is the condensing boiler specifically designed to operate with high temperatures and therefore with radiator systems. It is available in power ratings of 25 and 29 kW with low NOx emissions <56 mg/kWh. – Cooled burner – Low consumption circulator (IEE≤0.20) – Climatic regulation managed directly by the boiler control unit – Assembly crossbar, power supply cable supplied – Hydraulic connections available as an accessory – Degree of electrical protection IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€738,00
RIELLO START CONDENS 29 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features RIELLO START CONDENS BOILER 29 KIS METHANE Technical features Product code: 20100124 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General characteristics START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range. In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€870,00
RIELLO START CONDENS AR 29 KIS METHANE WALL-MOUNTED BOILER FREE FUME KIT KASKO INSURANCE INCLUDED + SHIPPING ON PLATFORM Product code: 20100124 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE START CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models for indoor, outdoor, built-in, with stainless steel storage tank Start Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can also be installed outdoors in a partially protected place. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air (accessories), this modification is the responsibility of the installer or the technical assistance service. Possibility of outdoor installation in partially protected places, using special accessory kits. Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models and heating only for indoors, outdoors in partially protected places Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€729,00
You have seen 12 out of 29 products
